final

DefaultBuild/multical.clnk

@@ -8,19 +8,14 @@
 -Input=DefaultBuild\r_cg_serial_user.obj
 -Input=DefaultBuild\r_cg_wdt.obj
 -Input=DefaultBuild\r_cg_wdt_user.obj
--Input=DefaultBuild\r_cg_adc.obj
--Input=DefaultBuild\r_cg_adc_user.obj
 -Input=DefaultBuild\r_cg_port.obj
 -Input=DefaultBuild\r_cg_port_user.obj
--Input=DefaultBuild\anaout.obj
 -Input=DefaultBuild\owi.obj
 -Input=DefaultBuild\i2c.obj
 -Input=DefaultBuild\uart.obj
 -Input=DefaultBuild\delay.obj
 -Input=DefaultBuild\dipSwitch.obj
 -Input=DefaultBuild\gatectrl.obj
--Input=DefaultBuild\hash_pin.obj
--Input=DefaultBuild\check_pin.obj
 -SECURITY_ID=00000000000000000000
 -DEVICE=C:\Program Files (x86)\Renesas Electronics\CS+\CC\Device\RL78\Devicefile\DR5F10PPJ.DVF
 -DEBug

DefaultBuild/multical.map

@@ -1,4 +1,4 @@
-Renesas Optimizing Linker (W3.07.00 )             14-Jan-2026 18:55:13
+Renesas Optimizing Linker (W3.07.00 )             21-Jan-2026 20:04:44
 
 *** Options ***
 
@@ -13,19 +13,14 @@ Renesas Optimizing Linker (W3.07.00 )             14-Jan-2026 18:55:13
 -Input=DefaultBuild\r_cg_serial_user.obj
 -Input=DefaultBuild\r_cg_wdt.obj
 -Input=DefaultBuild\r_cg_wdt_user.obj
--Input=DefaultBuild\r_cg_adc.obj
--Input=DefaultBuild\r_cg_adc_user.obj
 -Input=DefaultBuild\r_cg_port.obj
 -Input=DefaultBuild\r_cg_port_user.obj
--Input=DefaultBuild\anaout.obj
 -Input=DefaultBuild\owi.obj
 -Input=DefaultBuild\i2c.obj
 -Input=DefaultBuild\uart.obj
 -Input=DefaultBuild\delay.obj
 -Input=DefaultBuild\dipSwitch.obj
 -Input=DefaultBuild\gatectrl.obj
--Input=DefaultBuild\hash_pin.obj
--Input=DefaultBuild\check_pin.obj
 -SECURITY_ID=00000000000000000000
 -DEVICE=C:\Program Files (x86)\Renesas Electronics\CS+\CC\Device\RL78\Devicefile\DR5F10PPJ.DVF
 -DEBug
@@ -65,19 +60,19 @@ SECTION                            START      END         SIZE   ALIGN
 .RLIB
                                   000000c4  000000c4         0   1
 .data
-                                  000000ce  0000014c        7f   2
+                                  000000ce  000002e5       218   2
 .text
-                                  0000014d  000002ff       1b3   1
+                                  000002e6  00000498       1b3   1
 .textf
-                                  00000300  00001ecd      1bce   1
+                                  00000499  000023b6      1f1e   1
 .const
-                                  00003000  00003413       414   2
+                                  00003000  00003385       386   2
 .SLIB
-                                  00003414  00005e55      2a42   1
+                                  00003386  00005c3c      28b7   1
 .bss
-                                  000faf00  000fafa3        a4   2
+                                  000faf00  000fb0a5       1a6   2
 .dataR
-                                  000fafa4  000fb022        7f   2
+                                  000fb0a6  000fb2bd       218   2
 .sbss
                                   000ffe20  000ffe20         0   2
 .sdataR
@@ -85,9 +80,9 @@ SECTION                            START      END         SIZE   ALIGN
 
 *** Total Section Size ***
 
-RAMDATA SECTION:  00000123 Byte(s)
+RAMDATA SECTION:  000003be Byte(s)
-ROMDATA SECTION:  00000535 Byte(s)
+ROMDATA SECTION:  00000640 Byte(s)
-PROGRAM SECTION:  000047c3 Byte(s)
+PROGRAM SECTION:  00004988 Byte(s)
 
 *** Symbol List ***
 
@@ -113,574 +108,511 @@ FILE=rlink_generates_02
 
 SECTION=.data
 FILE=DefaultBuild\r_main.obj
-                                  000000ce  00000132        65
+                                  000000ce  000002db       20e
+FILE=DefaultBuild\owi.obj
+                                  000002dc  000002df         4
 FILE=DefaultBuild\i2c.obj
-                                  00000134  00000139         6
+                                  000002e0  000002e5         6
-FILE=DefaultBuild\uart.obj
-                                  0000013a  0000014a        11
-FILE=DefaultBuild\gatectrl.obj
-                                  0000014c  0000014c         1
 
 SECTION=.text
 FILE=DefaultBuild\cstart.obj
-                                  0000014d  000001bf        73
+                                  000002e6  00000358        73
   _start
-                                  0000014d         0   none ,g         * 
+                                  000002e6         0   none ,g         * 
   _exit
-                                  000001bd         0   none ,g         * 
+                                  00000356         0   none ,g         * 
   _atexit
-                                  000001bf         0   none ,g         * 
+                                  00000358         0   none ,g         * 
 FILE=DefaultBuild\r_cg_serial_user.obj
-                                  000001c0  000002fb       13c
+                                  00000359  00000496       13e
   _r_uart0_interrupt_receive@1
-                                  000001c0        5f   func ,l         * 
+                                  00000359        5f   func ,l         * 
   _r_uart0_interrupt_send@1
-                                  0000021f        2f   func ,l         * 
+                                  000003b8        2f   func ,l         * 
   _r_uart1_interrupt_receive@1
-                                  0000024e        5f   func ,l         * 
+                                  000003e7        5f   func ,l         * 
   _r_uart1_interrupt_send@1
-                                  000002ad        2f   func ,l         * 
+                                  00000446        2f   func ,l         * 
   _r_iica0_interrupt@1
-                                  000002dc        20   func ,l         * 
+                                  00000475        22   func ,l         * 
 FILE=DefaultBuild\r_cg_wdt_user.obj
-                                  000002fc  000002fd         2
+                                  00000497  00000498         2
   _r_wdt_interrupt@1
-                                  000002fc         2   func ,l         * 
+                                  00000497         2   func ,l         * 
-FILE=DefaultBuild\r_cg_adc_user.obj
-                                  000002fe  000002ff         2
-  _r_adc_interrupt@1
-                                  000002fe         2   func ,l         * 
 
 SECTION=.textf
 FILE=DefaultBuild\stkinit.obj
-                                  00000300  00000343        44
+                                  00000499  000004dc        44
   _stkinit
-                                  00000300         0   none ,g         * 
+                                  00000499         0   none ,g         * 
   LSTINIT1
-                                  0000030e         0   none ,l         * 
+                                  000004a7         0   none ,l         * 
   LSTINIT2
-                                  00000338         0   none ,l         * 
+                                  000004d1         0   none ,l         * 
   LSTINIT3
-                                  00000343         0   none ,l         * 
+                                  000004dc         0   none ,l         * 
 FILE=DefaultBuild\r_main.obj
-                                  00000344  00000903       5c0
+                                  000004dd  00000cea       80e
+  _RS485_Bridge_Push
+                                  000004dd        1a   func ,g         * 
+  _RS485_Bridge_ResetFifo@1
+                                  000004f7         7   func ,l         * 
+  _RS485_Bridge_DrainToPC@1
+                                  000004fe        2b   func ,l         * 
   _hex2byte@1
-                                  00000344        34   func ,l         * 
+                                  00000529        34   func ,l         * 
+  _OUT_PRINT@1
+                                  0000055d         c   func ,l         * 
+  _send_v_response@1
+                                  00000569        2d   func ,l         * 
+  _process_cmd@1
+                                  00000596        7f   func ,l         * 
+  _process_one_line@1
+                                  00000615       626   func ,l         * 
   _handle_uart_command_line
-                                  00000378       539   func ,g         * 
+                                  00000c3b        5b   func ,g         * 
   _main
-                                  000008b1        31   func ,g         * 
+                                  00000c96        3e   func ,g         * 
   _R_MAIN_UserInit
-                                  000008e2        22   func ,g         * 
+                                  00000cd4        17   func ,g         * 
 FILE=DefaultBuild\r_systeminit.obj
-                                  00000904  0000094a        47
+                                  00000ceb  00000d2f        45
   _R_Systeminit
-                                  00000904        42   func ,g         * 
+                                  00000ceb        3e   func ,g         * 
   _hdwinit
-                                  00000946         5   func ,g         * 
+                                  00000d29         7   func ,g         * 
 FILE=DefaultBuild\r_cg_cgc.obj
-                                  0000094b  00000974        2a
+                                  00000d30  00000d59        2a
   _R_CGC_Create
-                                  0000094b        2a   func ,g         * 
+                                  00000d30        2a   func ,g         * 
 FILE=DefaultBuild\r_cg_cgc_user.obj
-                                  00000975  00000977         3
+                                  00000d5a  00000d5c         3
   _R_CGC_Get_ResetSource
-                                  00000975         3   func ,g         * 
+                                  00000d5a         3   func ,g         * 
 FILE=DefaultBuild\r_cg_serial.obj
-                                  00000978  00000c4b       2d4
+                                  00000d5d  00001040       2e4
   _R_SAU0_Create
-                                  00000978         c   func ,g         * 
+                                  00000d5d        10   func ,g         * 
   _R_UART0_Create
-                                  00000984        6e   func ,g         * 
+                                  00000d6d        6e   func ,g         * 
   _R_UART0_Start
-                                  000009f2        26   func ,g         * 
+                                  00000ddb        26   func ,g         * 
   _R_UART0_Stop
-                                  00000a18        1e   func ,g         * 
+                                  00000e01        1e   func ,g         * 
   _R_UART0_Receive
-                                  00000a36        18   func ,g         * 
+                                  00000e1f        18   func ,g         * 
   _R_UART0_Send
-                                  00000a4e        26   func ,g         * 
+                                  00000e37        26   func ,g         * 
   _R_SAU1_Create
-                                  00000a74         c   func ,g         * 
+                                  00000e5d        10   func ,g         * 
   _R_UART1_Create
-                                  00000a80        6e   func ,g         * 
+                                  00000e6d        6e   func ,g         * 
   _R_UART1_Start
-                                  00000aee        26   func ,g         * 
+                                  00000edb        26   func ,g         * 
   _R_UART1_Stop
-                                  00000b14        1e   func ,g         * 
+                                  00000f01        1e   func ,g         * 
   _R_UART1_Receive
-                                  00000b32        18   func ,g         * 
+                                  00000f1f        18   func ,g         * 
   _R_UART1_Send
-                                  00000b4a        26   func ,g         * 
+                                  00000f37        26   func ,g         * 
   _R_IICA0_Create
-                                  00000b70        50   func ,g         * 
+                                  00000f5d        50   func ,g         * 
   _R_IICA0_Stop
-                                  00000bc0         5   func ,g         * 
+                                  00000fad         5   func ,g         * 
   _R_IICA0_StopCondition
-                                  00000bc5         5   func ,g         * 
+                                  00000fb2         5   func ,g         * 
   _R_IICA0_Master_Send
-                                  00000bca        3f   func ,g         * 
+                                  00000fb7        43   func ,g         * 
   _R_IICA0_Master_Receive
-                                  00000c09        43   func ,g         * 
+                                  00000ffa        47   func ,g         * 
 FILE=DefaultBuild\r_cg_serial_user.obj
-                                  00000c4c  00000d08        bd
+                                  00001041  00001187       147
   _r_uart0_callback_receiveend@1
-                                  00000c4c         1   func ,l         * 
+                                  00001041        71   func ,l         * 
   _r_uart0_callback_softwareoverrun@1
-                                  00000c4d         1   func ,l         * 
+                                  000010b2         1   func ,l         * 
   _r_uart0_callback_sendend@1
-                                  00000c4e         5   func ,l         * 
+                                  000010b3         6   func ,l         * 
   _r_uart0_callback_error@1
-                                  00000c53         1   func ,l         * 
+                                  000010b9         1   func ,l         * 
   _r_uart1_callback_receiveend@1
-                                  00000c54        2e   func ,l         * 
+                                  000010ba        2f   func ,l         * 
   _r_uart1_callback_softwareoverrun@1
-                                  00000c82         1   func ,l         * 
+                                  000010e9         1   func ,l         * 
   _r_uart1_callback_sendend@1
-                                  00000c83         1   func ,l         * 
+                                  000010ea         1   func ,l         * 
   _r_uart1_callback_error@1
-                                  00000c84         1   func ,l         * 
+                                  000010eb         1   func ,l         * 
   _iica0_masterhandler@1
-                                  00000c85        84   func ,l         * 
+                                  000010ec        91   func ,l         * 
+  _r_iica0_callback_master_error@1
+                                  0000117d         1   func ,l         * 
+  _r_iica0_callback_master_receiveend@1
+                                  0000117e         5   func ,l         * 
+  _r_iica0_callback_master_sendend@1
+                                  00001183         5   func ,l         * 
 FILE=DefaultBuild\r_cg_wdt.obj
-                                  00000d09  00000d1c        14
+                                  00001188  0000119b        14
   _R_WDT_Create
-                                  00000d09        10   func ,g         * 
+                                  00001188        10   func ,g         * 
   _R_WDT_Restart
-                                  00000d19         4   func ,g         * 
+                                  00001198         4   func ,g         * 
-FILE=DefaultBuild\r_cg_adc.obj
-                                  00000d1d  00000dd0        b4
-  _R_ADC_Create
-                                  00000d1d        91   func ,g         * 
-  _R_ADC_Start
-                                  00000dae         a   func ,g         * 
-  _R_ADC_Stop
-                                  00000db8         a   func ,g         * 
-  _R_ADC_Set_OperationOn
-                                  00000dc2         4   func ,g         * 
-  _R_ADC_Set_OperationOff
-                                  00000dc6         4   func ,g         * 
-  _R_ADC_Get_Result
-                                  00000dca         7   func ,g         * 
 FILE=DefaultBuild\r_cg_port.obj
-                                  00000dd1  00000dd7         7
+                                  0000119c  000011e7        4c
   _R_PORT_Create
-                                  00000dd1         7   func ,g         * 
+                                  0000119c        4c   func ,g         * 
-FILE=DefaultBuild\anaout.obj
-                                  00000dd8  00000e3a        63
-  _ANAOUT_Set
-                                  00000dd8        2b   func ,g         * 
-  _ANAOUT_AllOff
-                                  00000e03        11   func ,g         * 
-  _ANAOUT_Select
-                                  00000e14        15   func ,g         * 
-  _anaout_pin
-                                  00000e29        10   func ,g         * 
-  _anaout_all_off
-                                  00000e39         2   func ,g         * 
 FILE=DefaultBuild\owi.obj
-                                  00000e3b  000015a5       76b
+                                  000011e8  00001a6e       887
   _OWI_EnablePower
-                                  00000e3b         4   func ,g         * 
+                                  000011e8         4   func ,g         * 
   _OWI_DisablePower
-                                  00000e3f         3   func ,g         * 
+                                  000011ec         3   func ,g         * 
   _GPIO_Clear
-                                  00000e42         b   func ,g         * 
+                                  000011ef         b   func ,g         * 
   _GPIO_Input
-                                  00000e4d         7   func ,g         * 
+                                  000011fa         7   func ,g         * 
   _GPIO_Read
-                                  00000e54         6   func ,g         * 
+                                  00001201         9   func ,g         * 
   _OWI_Init
-                                  00000e5a         f   func ,g         * 
+                                  0000120a        18   func ,g         * 
   _OWI_Start
-                                  00000e69        16   func ,g         * 
+                                  00001222        17   func ,g         * 
   _OWI_Stop
-                                  00000e7f        15   func ,g         * 
+                                  00001239        17   func ,g         * 
   _OWI_SecureStop
-                                  00000e94        46   func ,g         * 
+                                  00001250        51   func ,g         * 
   _OWI_WriteBit
-                                  00000eda        3a   func ,g         * 
+                                  000012a1        3f   func ,g         * 
   _OWI_WriteByte
-                                  00000f14        32   func ,g         * 
+                                  000012e0        2a   func ,g         * 
   _OWI_ReadBit
-                                  00000f46        50   func ,g         * 
+                                  0000130a        5e   func ,g         * 
   _OWI_ReadByte
-                                  00000f96        34   func ,g         * 
+                                  00001368        32   func ,g         * 
   _OWI_T_ReadBytesAndPrint
-                                  00000fca        c8   func ,g         * 
+                                  0000139a        f3   func ,g         * 
   _OWI_A_CommandMode
-                                  00001092       26c   func ,g         * 
+                                  0000148d       268   func ,g         * 
   _OWI_Diagnostic
-                                  000012fe       102   func ,g         * 
+                                  000016f5       156   func ,g         * 
   _OWI_disable
-                                  00001400         9   func ,g         * 
+                                  0000184b        18   func ,g         * 
   _OWI_T_CommandMode
-                                  00001409        4f   func ,g         * 
+                                  00001863        60   func ,g         * 
   _OWI_CommandMode
-                                  00001458        40   func ,g         * 
+                                  000018c3        4a   func ,g         * 
   _OWI_ReadBytesAndPrint
-                                  00001498       10e   func ,g         * 
+                                  0000190d       162   func ,g         * 
 FILE=DefaultBuild\i2c.obj
-                                  000015a6  00001a47       4a2
+                                  00001a6f  00001de3       375
   _disable
-                                  000015a6        19   func ,g         * 
+                                  00001a6f        26   func ,g         * 
   _I2C_EnablePower
-                                  000015bf         4   func ,g         * 
+                                  00001a95         4   func ,g         * 
   _I2C_DisablePower
-                                  000015c3         3   func ,g         * 
+                                  00001a99         3   func ,g         * 
-  _I2C_A_Command_Mode_receiveData
-                                  000015c6       213   func ,g         * 
   _I2C_Diagnostic
-                                  000017d9        e4   func ,g         * 
+                                  00001a9c       124   func ,g         * 
   _I2C_T_Command_Mode_receiveData
-                                  000018bd        37   func ,g         * 
+                                  00001bc0        4f   func ,g         * 
   _I2C_Command_Mode_receiveData
-                                  000018f4        26   func ,g         * 
+                                  00001c0f        3e   func ,g         * 
   _I2C_Command_Mode_Send
-                                  0000191a       12e   func ,g         * 
+                                  00001c4d       197   func ,g         * 
 FILE=DefaultBuild\uart.obj
-                                  00001a48  00001ba1       15a
+                                  00001de4  00001eca        e7
   _rs485_set_tx
-                                  00001a48         b   func ,g         * 
+                                  00001de4         b   func ,g         * 
   _rs485_init
-                                  00001a53         a   func ,g         * 
+                                  00001def         c   func ,g         * 
   _uart_send_string
-                                  00001a5d        22   func ,g         * 
+                                  00001dfb        22   func ,g         * 
   _uart1_send_string
-                                  00001a7f        10   func ,g         * 
+                                  00001e1d        12   func ,g         * 
   _uart_send_hex
-                                  00001a8f        50   func ,g         * 
+                                  00001e2f        50   func ,g         * 
   _uart1_send_hex
-                                  00001adf        4c   func ,g         * 
+                                  00001e7f        4c   func ,g         * 
-  _ADC_ReadAndSend_UART
-                                  00001b2b        77   func ,g         * 
 FILE=DefaultBuild\delay.obj
-                                  00001ba2  00001c59        b8
+                                  00001ecb  00001f89        bf
   _delay
-                                  00001ba2        16   func ,g         * 
+                                  00001ecb        18   func ,g         * 
   _delay_us
-                                  00001bb8        7d   func ,g         * 
+                                  00001ee3        82   func ,g         * 
   _delay_ms
-                                  00001c35        25   func ,g         * 
+                                  00001f65        25   func ,g         * 
 FILE=DefaultBuild\dipSwitch.obj
-                                  00001c5a  00001c6f        16
+                                  00001f8a  00001f9a        11
   _DipSwitch_Init
-                                  00001c5a         8   func ,g         * 
+                                  00001f8a         8   func ,g         * 
-  _DipSwitch_ReadValue_0to31
+  _DipSwitch_ReadAddr_0to31
-                                  00001c62         9   func ,g         * 
+                                  00001f92         9   func ,g         * 
-  _DipSwitch_ReadAddr_1to32
-                                  00001c6b         5   func ,g         * 
 FILE=DefaultBuild\gatectrl.obj
-                                  00001c70  00001ce5        76
+                                  00001f9b  000023b6       41c
-  _write_port@1
+  _Gate_SetByNum
-                                  00001c70         d   func ,l         * 
+                                  00001f9b       3e9   func ,g         * 
-  _GateCtrl_Init
+  _Cal_Init
-                                  00001c7d        28   func ,g         * 
+                                  00002384        19   func ,g         * 
-  _GateCtrl_SetAll
+  _Eol_Init
-                                  00001ca5         8   func ,g         * 
+                                  0000239d        19   func ,g         * 
-  _GateCtrl_SetZacwire
-                                  00001cad         8   func ,g         * 
-  _GateCtrl_ClearChannelPins
-                                  00001cb5         c   func ,g         * 
   _GateCtrl_SelectChannel
-                                  00001cc1         d   func ,g         * 
+                                  000023b6         1   func ,g         * 
-  _GateCtrl_Anaout
-                                  00001cce         8   func ,g         * 
-  _GateCtrl_Hash
-                                  00001cd6         8   func ,g         * 
-  _GateCtrl_Check
-                                  00001cde         8   func ,g         * 
-FILE=DefaultBuild\hash_pin.obj
-                                  00001ce6  00001dd8        f3
-  _hash_write_port@1
-                                  00001ce6         d   func ,l         * 
-  _hash_set_output_pm@1
-                                  00001cf3         7   func ,l         * 
-  _hash_init
-                                  00001cfa        47   func ,g         * 
-  _hash_all_off
-                                  00001d41        10   func ,g         * 
-  _hash_pin
-                                  00001d51        88   func ,g         * 
-FILE=DefaultBuild\check_pin.obj
-                                  00001dd9  00001ecd        f5
-  _write_port@1
-                                  00001dd9         d   func ,l         * 
-  _set_output_pm@1
-                                  00001de6         7   func ,l         * 
-  _check_pin_init
-                                  00001ded        38   func ,g         * 
-  _check_all_off
-                                  00001e25        16   func ,g         * 
-  _check_pin
-                                  00001e3b        93   func ,g         * 
 
 SECTION=.const
 FILE=DefaultBuild\r_main.obj
-                                  00003000  00003145       146
+                                  00003000  00003149       14a
-FILE=DefaultBuild\anaout.obj
-                                  00003146  00003184        3f
-  _s_port@1
-                                  00003146        2a   data ,l         * 
-  _s_mask@2
-                                  00003170        15   data ,l         * 
 FILE=DefaultBuild\owi.obj
-                                  00003186  0000323f        ba
+                                  0000314a  0000320e        c5
 FILE=DefaultBuild\i2c.obj
-                                  00003240  00003396       157
+                                  00003210  00003349       13a
-FILE=DefaultBuild\uart.obj
+FILE=DefaultBuild\gatectrl.obj
-                                  00003398  0000339b         4
+                                  0000334a  00003385        3c
-  _ADC_CHANNELS@1@ADC_ReadAndSend_UART
-                                  00003398         4   data ,l         * 
-FILE=DefaultBuild\hash_pin.obj
-                                  0000339c  000033d7        3c
-FILE=DefaultBuild\check_pin.obj
-                                  000033d8  00003413        3c
 
 SECTION=.SLIB
-FILE=_COM_faddsub
-                                  00003414  0000354e       13b
-  __COM_fsub
-                                  00003470         0   none ,g         * 
-  __COM_fadd
-                                  00003478         0   none ,g         * 
-FILE=_COM_fdiv
-                                  0000354f  0000367c       12e
-  __COM_fdiv
-                                  000035ae         0   none ,g         * 
-FILE=_COM_fmul
-                                  0000367d  00003769        ed
-  __COM_fmul
-                                  000036c8         0   none ,g         * 
 FILE=_COM_ftoul
-                                  0000376a  00003775         c
+                                  00003386  00003391         c
   __COM_ftoul
-                                  0000376a         0   none ,g         * 
+                                  00003386         0   none ,g         * 
-FILE=_COM_ultof
-                                  00003776  0000377b         6
-  __COM_ultof
-                                  00003776         0   none ,g         * 
 FILE=isdigit
-                                  0000377c  00003785         a
+                                  00003392  0000339b         a
   _isdigit
-                                  0000377c         0   none ,g         * 
+                                  00003392         0   none ,g         * 
 FILE=memcpy
-                                  00003786  00003795        10
+                                  0000339c  000033ab        10
   _memcpy
-                                  00003786         0   none ,g         * 
+                                  0000339c         0   none ,g         * 
 FILE=memset
-                                  00003796  000037a3         e
+                                  000033ac  000033b9         e
   _memset
-                                  00003796         0   none ,g         * 
+                                  000033ac         0   none ,g         * 
 FILE=sprintf
-                                  000037a4  0000389c        f9
+                                  000033ba  000034b2        f9
   _sprintf
-                                  000037a4        e1   func ,g         * 
+                                  000033ba        e1   func ,g         * 
   __REL_sp@1
-                                  00003885        18   func ,l         * 
+                                  0000349b        18   func ,l         * 
 FILE=strcpy
-                                  0000389d  000038a9         d
+                                  000034b3  000034bf         d
   _strcpy
-                                  0000389d         0   none ,g         * 
+                                  000034b3         0   none ,g         * 
 FILE=toupper
-                                  000038aa  000038b7         e
+                                  000034c0  000034cd         e
   _toupper
-                                  000038aa         0   none ,g         * 
+                                  000034c0         0   none ,g         * 
-FILE=_REL_f_inf
-                                  000038b8  000038bf         8
-  __REL_f_inf
-                                  000038b8         0   none ,g         * 
-FILE=_REL_f_norm
-                                  000038c0  000038cf        10
-  __REL_f_norm
-                                  000038c0         0   none ,g         * 
-FILE=_REL_f_round
-                                  000038d0  000038e2        13
-  __REL_f_round
-                                  000038d0         0   none ,g         * 
 FILE=_REL_ftol
-                                  000038e3  00003917        35
+                                  000034ce  00003502        35
   __REL_ftol
-                                  000038e3         0   none ,g         * 
+                                  000034ce         0   none ,g         * 
-FILE=_REL_ltof
-                                  00003918  00003961        4a
-  __REL_ltof
-                                  00003918         0   none ,g         * 
 FILE=_REL_print
-                                  00003962  000058b9      1f58
+                                  00003503  0000545a      1f58
   __REL_print
-                                  00003962      1046   func ,g         * 
+                                  00003503      1046   func ,g         * 
   __REL_fltprn@1
-                                  000049a8       941   func ,l         * 
+                                  00004549       941   func ,l         * 
   __REL_henkan1@1
-                                  000052e9        28   func ,l         * 
+                                  00004e8a        28   func ,l         * 
   __REL_henkan2@1
-                                  00005311        33   func ,l         * 
+                                  00004eb2        33   func ,l         * 
   __REL_pri@1
-                                  00005344       298   func ,l         * 
+                                  00004ee5       298   func ,l         * 
   __REL_fltgeti@1
-                                  000055dc       19d   func ,l         * 
+                                  0000517d       19d   func ,l         * 
   __REL_inmod@1
-                                  00005779       141   func ,l         * 
+                                  0000531a       141   func ,l         * 
+FILE=_COM_fdiv
+                                  0000545b  00005588       12e
+  __COM_fdiv
+                                  000054ba         0   none ,g         * 
 FILE=_COM_feq
-                                  000058ba  000058cf        16
+                                  00005589  0000559e        16
   __COM_feq
-                                  000058ba         0   none ,g         * 
+                                  00005589         0   none ,g         * 
 FILE=_COM_fge
-                                  000058d0  000058e5        16
+                                  0000559f  000055b4        16
   __COM_fge
-                                  000058d0         0   none ,g         * 
+                                  0000559f         0   none ,g         * 
 FILE=_COM_flt
-                                  000058e6  000058fb        16
+                                  000055b5  000055ca        16
   __COM_flt
-                                  000058e6         0   none ,g         * 
+                                  000055b5         0   none ,g         * 
+FILE=_COM_fmul
+                                  000055cb  000056b7        ed
+  __COM_fmul
+                                  00005616         0   none ,g         * 
 FILE=_COM_fne
-                                  000058fc  0000590c        11
+                                  000056b8  000056c8        11
   __COM_fne
-                                  000058fc         0   none ,g         * 
+                                  000056b8         0   none ,g         * 
 FILE=_COM_ftosl
-                                  0000590d  00005914         8
+                                  000056c9  000056d0         8
   __COM_ftosl
-                                  0000590d         0   none ,g         * 
+                                  000056c9         0   none ,g         * 
 FILE=_COM_lshr
-                                  00005915  00005935        21
+                                  000056d1  000056f1        21
   __COM_lshr
-                                  0000591f         0   none ,g         * 
+                                  000056db         0   none ,g         * 
 FILE=_COM_sidiv
-                                  00005936  00005957        22
+                                  000056f2  00005713        22
   __COM_sidiv
-                                  00005938         0   none ,g         * 
+                                  000056f4         0   none ,g         * 
 FILE=_COM_sirem
-                                  00005958  00005977        20
+                                  00005714  00005733        20
   __COM_sirem
-                                  00005958         0   none ,g         * 
+                                  00005714         0   none ,g         * 
 FILE=_COM_ulldiv
-                                  00005978  000059a1        2a
+                                  00005734  0000575d        2a
   __COM_ulldiv
-                                  00005978         0   none ,g         * 
+                                  00005734         0   none ,g         * 
 FILE=_COM_ullrem
-                                  000059a2  000059d2        31
+                                  0000575e  0000578e        31
   __COM_ullrem
-                                  000059a2         0   none ,g         * 
+                                  0000575e         0   none ,g         * 
+FILE=_REL_f_inf
+                                  0000578f  00005796         8
+  __REL_f_inf
+                                  0000578f         0   none ,g         * 
+FILE=_REL_f_norm
+                                  00005797  000057a6        10
+  __REL_f_norm
+                                  00005797         0   none ,g         * 
+FILE=_REL_f_round
+                                  000057a7  000057b9        13
+  __REL_f_round
+                                  000057a7         0   none ,g         * 
 FILE=_REL_fcmp
-                                  000059d3  00005a0a        38
+                                  000057ba  000057f1        38
   __REL_fcmp
-                                  000059d3         0   none ,g         * 
+                                  000057ba         0   none ,g         * 
 FILE=_REL_fordered_core
-                                  00005a0b  00005a26        1c
+                                  000057f2  0000580d        1c
   __REL_fordered_core
-                                  00005a0b         0   none ,g         * 
+                                  000057f2         0   none ,g         * 
 FILE=_REL_lldiv
-                                  00005a27  00005c2c       206
+                                  0000580e  00005a13       206
   __REL_lldiv
-                                  00005a43         0   none ,g         * 
+                                  0000582a         0   none ,g         * 
 FILE=_REL_llrem
-                                  00005c2d  00005e30       204
+                                  00005a14  00005c17       204
   __REL_llrem
-                                  00005c4a         0   none ,g         * 
+                                  00005a31         0   none ,g         * 
 FILE=_REL_ltosl
-                                  00005e31  00005e55        25
+                                  00005c18  00005c3c        25
   __REL_ltosl
-                                  00005e31         0   none ,g         * 
+                                  00005c18         0   none ,g         * 
 
 SECTION=.bss
+FILE=DefaultBuild\r_main.obj
+                                  000faf00  000fb001       102
+  _s_rb_fifo@1
+                                  000faf00       100   data ,l         * 
+  _out@5@RS485_Bridge_DrainToPC@1
+                                  000fb000         2   data ,l         * 
 FILE=DefaultBuild\r_cg_serial.obj
-                                  000faf00  000faf1f        20
+                                  000fb002  000fb021        20
   _gp_uart0_tx_address
-                                  000faf00         2   data ,g         * 
+                                  000fb002         2   data ,g         * 
   _g_uart0_tx_count
-                                  000faf02         2   data ,g         * 
+                                  000fb004         2   data ,g         * 
   _gp_uart0_rx_address
-                                  000faf04         2   data ,g         * 
+                                  000fb006         2   data ,g         * 
   _g_uart0_rx_count
-                                  000faf06         2   data ,g         * 
+                                  000fb008         2   data ,g         * 
   _g_uart0_rx_length
-                                  000faf08         2   data ,g         * 
+                                  000fb00a         2   data ,g         * 
   _gp_uart1_tx_address
-                                  000faf0a         2   data ,g         * 
+                                  000fb00c         2   data ,g         * 
   _g_uart1_tx_count
-                                  000faf0c         2   data ,g         * 
+                                  000fb00e         2   data ,g         * 
   _gp_uart1_rx_address
-                                  000faf0e         2   data ,g         * 
+                                  000fb010         2   data ,g         * 
   _g_uart1_rx_count
-                                  000faf10         2   data ,g         * 
+                                  000fb012         2   data ,g         * 
   _g_uart1_rx_length
-                                  000faf12         2   data ,g         * 
+                                  000fb014         2   data ,g         * 
   _g_iica0_master_status_flag
-                                  000faf14         1   data ,g         * 
+                                  000fb016         1   data ,g         * 
   _g_iica0_slave_status_flag
-                                  000faf15         1   data ,g         * 
+                                  000fb017         1   data ,g         * 
   _gp_iica0_rx_address
-                                  000faf16         2   data ,g         * 
+                                  000fb018         2   data ,g         * 
   _g_iica0_rx_len
-                                  000faf18         2   data ,g         * 
+                                  000fb01a         2   data ,g         * 
   _g_iica0_rx_cnt
-                                  000faf1a         2   data ,g         * 
+                                  000fb01c         2   data ,g         * 
   _gp_iica0_tx_address
-                                  000faf1c         2   data ,g         * 
+                                  000fb01e         2   data ,g         * 
   _g_iica0_tx_cnt
-                                  000faf1e         2   data ,g         * 
+                                  000fb020         2   data ,g         * 
 FILE=sprintf
-                                  000faf20  000faf23         4
+                                  000fb022  000fb025         4
   __REL_pointer@1
-                                  000faf20         4   data ,l         * 
+                                  000fb022         4   data ,l         * 
 FILE=_REL_print
-                                  000faf24  000fafa3        80
+                                  000fb026  000fb0a5        80
   _qt@1@_REL_inmod@1
-                                  000faf24        80   data ,l         * 
+                                  000fb026        80   data ,l         * 
 
 SECTION=.dataR
 FILE=DefaultBuild\r_main.obj
-                                  000fafa4  000fb008        65
+                                  000fb0a6  000fb2b3       20e
   _uart_rx_done
-                                  000fafa4         1   data ,g         * 
+                                  000fb0a6         1   data ,g         * 
   _uart_rx_index
-                                  000fafa5         1   data ,g         * 
+                                  000fb0a7         1   data ,g         * 
   _uart_rx_buffer
-                                  000fafa6        60   data ,g         * 
+                                  000fb0a8       100   data ,g         * 
   _uart_rx_length
-                                  000fb006         2   data ,g         * 
+                                  000fb1a8         2   data ,g         * 
-  _g_fixed_addr@1
+  _rs485_rx_done
-                                  000fb008         1   data ,l         * 
+                                  000fb1aa         1   data ,g         * 
+  _rs485_rx_index
+                                  000fb1ab         1   data ,g         * 
+  _rs485_rx_buffer
+                                  000fb1ac       100   data ,g         * 
+  _rs485_rx_length
+                                  000fb2ac         2   data ,g         * 
+  _g_rs485_bridge_active
+                                  000fb2ae         1   data ,g         * 
+  _g_rs485_bridge_done
+                                  000fb2af         1   data ,g         * 
+  _g_fixed_addr
+                                  000fb2b0         1   data ,g         * 
+  _s_rb_head@2
+                                  000fb2b1         1   data ,l         * 
+  _s_rb_tail@3
+                                  000fb2b2         1   data ,l         * 
+  _s_prefix_mode@4
+                                  000fb2b3         1   data ,l         * 
+FILE=DefaultBuild\owi.obj
+                                  000fb2b4  000fb2b7         4
+  _bit_period_us@1
+                                  000fb2b4         4   data ,l         * 
 FILE=DefaultBuild\i2c.obj
-                                  000fb00a  000fb00f         6
+                                  000fb2b8  000fb2bd         6
   _g_i2c_last_command
-                                  000fb00a         3   data ,g         * 
+                                  000fb2b8         3   data ,g         * 
   _g_i2c_command_valid
-                                  000fb00d         1   data ,g         * 
+                                  000fb2bb         1   data ,g         * 
   _dis@1@disable
-                                  000fb00e         2   data ,l         * 
+                                  000fb2bc         2   data ,l         * 
-FILE=DefaultBuild\uart.obj
-                                  000fb010  000fb020        11
-  _g_adc_bytes
-                                  000fb010        10   data ,g         * 
-  _g_adc_len
-                                  000fb020         1   data ,g         * 
-FILE=DefaultBuild\gatectrl.obj
-                                  000fb022  000fb022         1
-  _s_ch@1
-                                  000fb022         1   data ,l         * 
 
 Absolute value symbols
-FILE=DefaultBuild\hash_pin.obj
+FILE=DefaultBuild\gatectrl.obj
-  @$IMM_28
-                                  00000028         0   none ,l         * 
-FILE=DefaultBuild\check_pin.obj
   @$IMM_28
                                   00000028         0   none ,l         * 
 FILE=rlink_generates_04
   __s.text
-                                  0000014d         0   none ,g         * 
+                                  000002e6         0   none ,g         * 
   __e.text
-                                  00000300         0   none ,g         * 
+                                  00000499         0   none ,g         * 
   __s.textf
-                                  00000300         0   none ,g         * 
+                                  00000499         0   none ,g         * 
   __e.textf
-                                  00001ece         0   none ,g         * 
+                                  000023b7         0   none ,g         * 
   __s.const
                                   00003000         0   none ,g         * 
   __e.const
-                                  00003414         0   none ,g         * 
+                                  00003386         0   none ,g         * 
   __s.constf
                                   00000080         0   none ,g         * 
   __e.constf
@@ -688,7 +620,7 @@ FILE=rlink_generates_04
   __s.data
                                   000000ce         0   none ,g         * 
   __e.data
-                                  0000014d         0   none ,g         * 
+                                  000002e6         0   none ,g         * 
   __s.sdata
                                   00000080         0   none ,g         * 
   __e.sdata
@@ -696,15 +628,15 @@ FILE=rlink_generates_04
   __s.bss
                                   000faf00         0   none ,g         * 
   __e.bss
-                                  000fafa4         0   none ,g         * 
+                                  000fb0a6         0   none ,g         * 
   __s.sbss
                                   000ffe20         0   none ,g         * 
   __e.sbss
                                   000ffe20         0   none ,g         * 
   __s.dataR
-                                  000fafa4         0   none ,g         * 
+                                  000fb0a6         0   none ,g         * 
   __e.dataR
-                                  000fb023         0   none ,g         * 
+                                  000fb2be         0   none ,g         * 
   __s.sdataR
                                   000ffe20         0   none ,g         * 
   __e.sdataR
@@ -718,9 +650,9 @@ FILE=rlink_generates_04
   __e.RLIB
                                   000000c4         0   none ,g         * 
   __s.SLIB
-                                  00003414         0   none ,g         * 
+                                  00003386         0   none ,g         * 
   __e.SLIB
-                                  00005e56         0   none ,g         * 
+                                  00005c3d         0   none ,g         * 
   __s.option_byte
                                   000000c0         0   none ,g         * 
   __e.option_byte
@@ -740,7 +672,7 @@ FILE=rlink_generates_04
   __STACK_ADDR_START
                                   000ffe20         0   none ,g         * 
   __STACK_ADDR_END
-                                  000fb024         0   none ,g         * 
+                                  000fb2be         0   none ,g         * 
 
 *** Unfilled Areas ***
 

QualityReport(multical,DefaultBuild).txt

@@ -1,28 +1,24 @@
 QualityReport
-2026년 1월 14일 수요일 오후 6:55:13
+2026년 1월 21일 수요일 오후 8:04:44
 
 ------ Start build(multical, DefaultBuild) ------
 C:\Program Files (x86)\Renesas Electronics\CS+\CC\CC-RL\V1.15.00\Bin\ccrl.exe r_main.c -cpu=S3 -o DefaultBuild\r_main.obj "-dev=C:\Program Files (x86)\Renesas Electronics\CS+\CC\Device\RL78\Devicefile\DR5F10PPJ.DVF" -g -g_line -I "..\..\Documents\카카오톡 받은 파일\IDH1.1\IDH1.1" -I ..\IDH1.1 -I . -c -msg_lang=english
-C:\Program Files (x86)\Renesas Electronics\CS+\CC\CC-RL\V1.15.00\Bin\ccrl.exe anaout.c -cpu=S3 -o DefaultBuild\anaout.obj "-dev=C:\Program Files (x86)\Renesas Electronics\CS+\CC\Device\RL78\Devicefile\DR5F10PPJ.DVF" -g -g_line -I "..\..\Documents\카카오톡 받은 파일\IDH1.1\IDH1.1" -I ..\IDH1.1 -I . -c -msg_lang=english
-C:\Program Files (x86)\Renesas Electronics\CS+\CC\CC-RL\V1.15.00\Bin\ccrl.exe gatectrl.c -cpu=S3 -o DefaultBuild\gatectrl.obj "-dev=C:\Program Files (x86)\Renesas Electronics\CS+\CC\Device\RL78\Devicefile\DR5F10PPJ.DVF" -g -g_line -I "..\..\Documents\카카오톡 받은 파일\IDH1.1\IDH1.1" -I ..\IDH1.1 -I . -c -msg_lang=english
-W0511106:The folder "..\..\Documents\카카오톡 받은 파일\IDH1.1\IDH1.1" specified by the "-I" option is not found.
-W0511106:The folder "..\..\Documents\카카오톡 받은 파일\IDH1.1\IDH1.1" specified by the "-I" option is not found.
-W0511106:The folder "..\..\Documents\카카오톡 받은 파일\IDH1.1\IDH1.1" specified by the "-I" option is not found.
 W0511106:The folder "..\IDH1.1" specified by the "-I" option is not found.
-W0511106:The folder "..\IDH1.1" specified by the "-I" option is not found.
+W0511186:The evaluation period for the option "-Odefault" of CC-RL V1 is valid for the remaining 52 days. After that, it will be implicitly changed to "-Olite". Please consider purchasing the product to continue using "-Odefault". 
-W0511106:The folder "..\IDH1.1" specified by the "-I" option is not found.
-W0511186:The evaluation period for the option "-Odefault" of CC-RL V1 is valid for the remaining 60 days. After that, it will be implicitly changed to "-Olite". Please consider purchasing the product to continue using "-Odefault". 
-W0511186:The evaluation period for the option "-Odefault" of CC-RL V1 is valid for the remaining 60 days. After that, it will be implicitly changed to "-Olite". Please consider purchasing the product to continue using "-Odefault". 
-W0511186:The evaluation period for the option "-Odefault" of CC-RL V1 is valid for the remaining 60 days. After that, it will be implicitly changed to "-Olite". Please consider purchasing the product to continue using "-Odefault". 
 owi.h(47):W0523076:Function declarations should have prototype
-i2c.h(8):W0520047:Incompatible redefinition of macro "RAM_BYTES" (declared at line 11 of "uart.h")
+i2c.h(8):W0520047:Incompatible redefinition of macro "RAM_BYTES" (declared at line 10 of "uart.h")
-r_main.c(116):W0520172:External/internal linkage conflict with previous declaration
+C:\Program Files (x86)\Renesas Electronics\CS+\CC\CC-RL\V1.15.00\inc\stdint.h(18):W0520301:Typedef name has already been declared (with same type)
-r_main.c(134):W0523077:Called function should have prototype
+C:\Program Files (x86)\Renesas Electronics\CS+\CC\CC-RL\V1.15.00\inc\stdint.h(19):W0520301:Typedef name has already been declared (with same type)
+C:\Program Files (x86)\Renesas Electronics\CS+\CC\CC-RL\V1.15.00\inc\stdint.h(20):W0520301:Typedef name has already been declared (with same type)
+C:\Program Files (x86)\Renesas Electronics\CS+\CC\CC-RL\V1.15.00\inc\stdint.h(25):W0520301:Typedef name has already been declared (with same type)
+C:\Program Files (x86)\Renesas Electronics\CS+\CC\CC-RL\V1.15.00\inc\stdint.h(26):W0520301:Typedef name has already been declared (with same type)
+C:\Program Files (x86)\Renesas Electronics\CS+\CC\CC-RL\V1.15.00\inc\stdint.h(27):W0520301:Typedef name has already been declared (with same type)
+r_main.c(316):W0520172:External/internal linkage conflict with previous declaration
 C:\Program Files (x86)\Renesas Electronics\CS+\CC\CC-RL\V1.15.00\Bin\rlink.exe -subcommand=DefaultBuild\multical.clnk
-W0561018:The evaluation period of CC-RL V1 is valid for the remaining 60 days. After that, functional limit will be applied. Please consider purchasing the product.
+W0561018:The evaluation period of CC-RL V1 is valid for the remaining 52 days. After that, functional limit will be applied. Please consider purchasing the product.
-W0561018:The evaluation period of CC-RL V1 is valid for the remaining 60 days. After that, functional limit will be applied. Please consider purchasing the product.
+W0561018:The evaluation period of CC-RL V1 is valid for the remaining 52 days. After that, functional limit will be applied. Please consider purchasing the product.
 Renesas Optimizing Linker Completed
------- Build ended(Error:0, Warning:15)(multical, DefaultBuild) ------
+------ Build ended(Error:0, Warning:13)(multical, DefaultBuild) ------
 
 --- CommandFile 1 ---
 DefaultBuild\multical.clnk :
@@ -36,19 +32,14 @@ DefaultBuild\multical.clnk :
 -Input=DefaultBuild\r_cg_serial_user.obj
 -Input=DefaultBuild\r_cg_wdt.obj
 -Input=DefaultBuild\r_cg_wdt_user.obj
--Input=DefaultBuild\r_cg_adc.obj
--Input=DefaultBuild\r_cg_adc_user.obj
 -Input=DefaultBuild\r_cg_port.obj
 -Input=DefaultBuild\r_cg_port_user.obj
--Input=DefaultBuild\anaout.obj
 -Input=DefaultBuild\owi.obj
 -Input=DefaultBuild\i2c.obj
 -Input=DefaultBuild\uart.obj
 -Input=DefaultBuild\delay.obj
 -Input=DefaultBuild\dipSwitch.obj
 -Input=DefaultBuild\gatectrl.obj
--Input=DefaultBuild\hash_pin.obj
--Input=DefaultBuild\check_pin.obj
 -SECURITY_ID=00000000000000000000
 -DEVICE=C:\Program Files (x86)\Renesas Electronics\CS+\CC\Device\RL78\Devicefile\DR5F10PPJ.DVF
 -DEBug
@@ -76,19 +67,19 @@ DefaultBuild\multical.clnk :
 
 
 --- SHA1 hash value of output files ---
-C:\Users\COMPUTER1\OneDrive\Desktop\Amosense_Firmware1\DefaultBuild\multical.abs: 55c523f42c5f81fb6f95882f964b7fad1ba0b973
+C:\Users\guseo\Desktop\Amosense_Firmware 최종\DefaultBuild\multical.abs: 23ea96fd6401573919b64b35b3f66cbe0d04daf4
-C:\Users\COMPUTER1\OneDrive\Desktop\Amosense_Firmware1\DefaultBuild\multical.mot: 44476140b1f3400e9c301d09ba0adf83ed9d2e12
+C:\Users\guseo\Desktop\Amosense_Firmware 최종\DefaultBuild\multical.mot: ca40aa63387b2dce93016b86bcf6746cbc99d2e3
 
 
 --- System Information ---
 *OS Version
- Microsoft Windows 11 Pro (-, 10.0.26200, WOW64)
+ Microsoft Windows 11 Home (-, 10.0.26200, WOW64)
 *Language
  한국어(대한민국)
 *.NET Framework Version
  Microsoft .NET Framework 4 [.NET 4.8 or later] (533509)
 *WebView2 Version
- 143.0.3650.139
+ 144.0.3719.82
 
 --- Application Information ---
 *Product Name
@@ -105,13 +96,13 @@ C:\Users\COMPUTER1\OneDrive\Desktop\Amosense_Firmware1\DefaultBuild\multical.mot
  C:\Program Files (x86)\Renesas Electronics\CS+\CC
 *Memory Usage
  *Private Working Set
-  328 MB
+  373 MB
  *Number of GDI Objects
-  2472
+  2518
  *Number of USER Objects
-  1497
+  1509
  *Opened Files
-  14 editors, 14 files, 39 KB
+  11 editors, 11 files, 87 KB
 
 --- Build Tool Plug-in Information ---
 RH850 Build tool CC-RH Plug-in
@@ -247,7 +238,7 @@ Device Information Common Interface
   DeviceInformation.dll
 
 --- Main Project Information ---
-C:\Users\COMPUTER1\OneDrive\Desktop\Amosense_Firmware1\multical.mtpj
+C:\Users\guseo\Desktop\Amosense_Firmware 최종\multical.mtpj
 Microcontroller Information
  *R5F10PPJ
   *File Name: Version

anaout.c

@@ -1,70 +0,0 @@
-#include "anaout.h"
-
-#define BIT(n)   (1u << (n))
-
-static void write_port(volatile uint8_t *port, uint8_t mask, uint8_t on)
-{
-    if (on) *port |= mask;
-    else    *port &= (uint8_t)~mask;
-}
-
-/* ?? -> (?? ??, ???) ??? */
-static volatile uint8_t * const s_port[21] = {
-    0,
-    &P6, &P6, &P6, &P6,   // 1~4
-    &P4, &P4, &P4, &P4,   // 5~8
-    &P5, &P5, &P5,        // 9~11
-    &P6, &P6,             // 12~13
-    &P7, &P7, &P7, &P7, &P7, &P7,  // 14~19
-    &P13                  // 20
-};
-
-static const uint8_t s_mask[21] = {
-    0,
-    (uint8_t)BIT(4), (uint8_t)BIT(5), (uint8_t)BIT(6), (uint8_t)BIT(7),  // P64~P67
-    (uint8_t)BIT(4), (uint8_t)BIT(3), (uint8_t)BIT(2), (uint8_t)BIT(1),  // P44,P43,P42,P41
-    (uint8_t)BIT(0), (uint8_t)BIT(1), (uint8_t)BIT(2),                  // P50,P51,P52
-    (uint8_t)BIT(0), (uint8_t)BIT(1),                                    // P60,P61
-    (uint8_t)BIT(2), (uint8_t)BIT(3), (uint8_t)BIT(5), (uint8_t)BIT(4), (uint8_t)BIT(6), (uint8_t)BIT(7), // P72~P77
-    (uint8_t)BIT(0)                                                       // P130
-};
-
-void ANAOUT_Set(uint8_t ch, uint8_t on)
-{
-    if (ch < 1 || ch > 20) return;
-    write_port(s_port[ch], s_mask[ch], on);
-}
-
-void ANAOUT_AllOff(void)
-{
-    uint8_t ch;
-    for (ch = 1; ch <= 20; ch++)
-    {
-        ANAOUT_Set(ch, 0);
-    }
-}
-
-void ANAOUT_Select(uint8_t ch)
-{
-    if (ch < 1 || ch > 20) return;
-    ANAOUT_AllOff();
-    ANAOUT_Set(ch, 1);
-}
-
-void anaout_pin(uint8_t ch, uint8_t on)
-{
-    if (ch < 1 || ch > 20) return;
-
-    if (on) {
-        // on=1?? "??" ???? ??(??? 1?? ??)
-        ANAOUT_Select(ch);
-    } else {
-        // off? ?? ??? OFF
-        ANAOUT_Set(ch, 0);
-    }
-}
-
-void anaout_all_off(void)
-{
-    ANAOUT_AllOff();
-}

anaout.h

@@ -1,28 +0,0 @@
-#ifndef ANAOUT_H
-#define ANAOUT_H
-
-#include "r_cg_macrodriver.h"
-#include "r_cg_port.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-void ANAOUT_Set(uint8_t ch, uint8_t on);
-
-/** 전체 채널 OFF */
-void ANAOUT_AllOff(void);
-
-/** 채널 선택(= 전체 OFF 후 해당 채널 ON) */
-void ANAOUT_Select(uint8_t ch);
-
-void anaout_pin(uint8_t ch, uint8_t on);
-
-/** 전체 OFF wrapper */
-void anaout_all_off(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ANAOUT_H */

check_pin.c

@@ -1,79 +0,0 @@
-#include "check_pin.h"
-
-#define BIT(n)   (1u << (n))
-
-static void write_port(volatile uint8_t *port, uint8_t mask, uint8_t on)
-{
-    if (on) *port |=  mask;
-    else    *port &= (uint8_t)~mask;
-}
-
-static void set_output_pm(volatile uint8_t *pm, uint8_t mask)
-{
-    *pm &= (uint8_t)~mask;
-}
-
-void check_pin_init(void)
-{
-    // CHECK_1,2,4 : P15.4,5,6
-    set_output_pm(&PM15, (uint8_t)(BIT(4)|BIT(5)|BIT(6)));
-
-    // CHECK_3,7 : P0.0,3
-    set_output_pm(&PM0, (uint8_t)(BIT(0)|BIT(3)));
-
-    // CHECK_5,6 : P3.0,2
-    set_output_pm(&PM3, (uint8_t)(BIT(0)|BIT(2)));
-
-    // CHECK_8,9 : P7.0,1
-    set_output_pm(&PM7, (uint8_t)(BIT(0)|BIT(1)));
-
-    // CHECK_10~13 : P10.4~7
-    set_output_pm(&PM10, (uint8_t)(BIT(4)|BIT(5)|BIT(6)|BIT(7)));
-
-    // CHECK_14~17 : P5.7,6,5,4
-    set_output_pm(&PM5, (uint8_t)(BIT(7)|BIT(6)|BIT(5)|BIT(4)));
-
-    // CHECK_18~20 : P1.0,3,4
-    set_output_pm(&PM1, (uint8_t)(BIT(0)|BIT(3)|BIT(4)));
-
-    check_all_off();
-}
-
-void check_all_off(void)
-{
-    P15 &= (uint8_t)~(BIT(4)|BIT(5)|BIT(6));
-    P0  &= (uint8_t)~(BIT(0)|BIT(3));
-    P3  &= (uint8_t)~(BIT(0)|BIT(2));
-    P7  &= (uint8_t)~(BIT(0)|BIT(1));
-    P10 &= (uint8_t)~(BIT(4)|BIT(5)|BIT(6)|BIT(7));
-    P5  &= (uint8_t)~(BIT(4)|BIT(5)|BIT(6)|BIT(7));
-    P1  &= (uint8_t)~(BIT(0)|BIT(3)|BIT(4));
-}
-
-void check_pin(uint8_t ch, uint8_t on)
-{
-    switch (ch)
-    {
-        case 1:  write_port(&P15, BIT(4), on); break; // CHECK_1 : P154
-        case 2:  write_port(&P15, BIT(5), on); break; // CHECK_2 : P155
-        case 3:  write_port(&P0,  BIT(0), on); break; // CHECK_3 : P00
-        case 4:  write_port(&P15, BIT(6), on); break; // CHECK_4 : P156
-        case 5:  write_port(&P3,  BIT(0), on); break; // CHECK_5 : P30
-        case 6:  write_port(&P3,  BIT(2), on); break; // CHECK_6 : P32
-        case 7:  write_port(&P0,  BIT(3), on); break; // CHECK_7 : P03
-        case 8:  write_port(&P7,  BIT(0), on); break; // CHECK_8 : P70
-        case 9:  write_port(&P7,  BIT(1), on); break; // CHECK_9 : P71
-        case 10: write_port(&P10, BIT(4), on); break; // CHECK_10: P104
-        case 11: write_port(&P10, BIT(5), on); break; // CHECK_11: P105
-        case 12: write_port(&P10, BIT(6), on); break; // CHECK_12: P106
-        case 13: write_port(&P10, BIT(7), on); break; // CHECK_13: P107
-        case 14: write_port(&P5,  BIT(7), on); break; // CHECK_14: P57
-        case 15: write_port(&P5,  BIT(6), on); break; // CHECK_15: P56
-        case 16: write_port(&P5,  BIT(5), on); break; // CHECK_16: P55
-        case 17: write_port(&P5,  BIT(4), on); break; // CHECK_17: P54
-        case 18: write_port(&P1,  BIT(0), on); break; // CHECK_18: P10
-        case 19: write_port(&P1,  BIT(3), on); break; // CHECK_19: P13
-        case 20: write_port(&P1,  BIT(4), on); break; // CHECK_20: P14
-        default: /* ignore */ break;
-    }
-}

check_pin.h

@@ -1,26 +0,0 @@
-#ifndef CHECK_PIN_H
-#define CHECK_PIN_H
-
-#include "r_cg_macrodriver.h"
-#include "r_cg_port.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-void check_pin_init(void);
-
-/**
- * 채널(ch=1~20)의 CHECK 핀을 on/off
- * 예) ch=2 -> CHECK_2(P155) 제어
- */
-void check_pin(uint8_t ch, uint8_t on);
-
-/** (옵션) CHECK_1~CHECK_20 전체 OFF */
-void check_all_off(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* CHECK_PIN_H */

dipSwitch.c

@@ -16,7 +16,7 @@ void DipSwitch_Init(void)
     DIP_PM |= DIP_MASK;
 }
 
-uint8_t DipSwitch_ReadValue_0to31(void)
+uint8_t DipSwitch_ReadAddr_0to31(void)
 {
     uint8_t raw = (uint8_t)(DIP_PORT & DIP_MASK);
 
@@ -29,7 +29,4 @@ uint8_t DipSwitch_ReadValue_0to31(void)
     return (uint8_t)(v & 0x1Fu); // 0~31
 }
 
-uint8_t DipSwitch_ReadAddr_1to32(void)
+
-{
-    return (uint8_t)(DipSwitch_ReadValue_0to31() + 1u); // 1~32
-}

dipSwitch.h

@@ -18,13 +18,12 @@ void DipSwitch_Init(void);
  * - 회로: Pull-up, DIP ON -> GND (Active-Low)
  * - 핀: P8.1~P8.5 (ADD_1~ADD_5)
  */
-uint8_t DipSwitch_ReadAddr_1to32(void);
 
 /**
  * (옵션) 디버그용: DIP 5bit(0~31) 그대로 반환
  * - ADD_1이 LSB
  */
-uint8_t DipSwitch_ReadValue_0to31(void);
+uint8_t DipSwitch_ReadAddr_0to31(void);
 
 #ifdef __cplusplus
 }

gatectrl.c

@@ -1,78 +1,172 @@
 #include "gatectrl.h"
 
-#define BIT(n)   (1u << (n))
-
-// 공통핀 매핑
-// ALL : P47  -> Port4 bit7
-// ZACWIRE : P157 -> Port15 bit7
-#define ALL_PM      PM4
-#define ALL_MASK    (uint8_t)BIT(7)
-
-#define ZAC_PM      PM15
-#define ZAC_MASK    (uint8_t)BIT(7)
-
 static uint8_t s_ch = 1;
 
-static void write_port(volatile uint8_t *port, uint8_t mask, uint8_t on)
+#define PORT_BIT_SETCLR(PORT, MASK, ON)            \
+    do {                                           \
+        if (ON) { (PORT) |=  (uint8_t)(MASK); }    \
+        else     { (PORT) &= (uint8_t)~(MASK); }   \
+    } while (0)
+
+void Gate_SetByNum(uint8_t ch, uint8_t hash_on, uint8_t anaout_on, uint8_t check_on)
 {
-    if (on) *port |=  mask;
+    switch (ch)
-    else    *port &= (uint8_t)~mask;
+    {
+        case 1: /* HASH P15.3, ANAOUT P6.4, CHECK P15.4 */
+            PORT_BIT_SETCLR(P15, 0x08, hash_on);    // P15.3
+            PORT_BIT_SETCLR(P6,  0x10, anaout_on);  // P6.4
+            PORT_BIT_SETCLR(P15, 0x10, check_on);   // P15.4
+            break;
+
+        case 2: /* P15.2, P6.5, P15.5 */
+            PORT_BIT_SETCLR(P15, 0x04, hash_on);    // P15.2
+            PORT_BIT_SETCLR(P6,  0x20, anaout_on);  // P6.5
+            PORT_BIT_SETCLR(P15, 0x20, check_on);   // P15.5
+            break;
+
+        case 3: /* P15.1, P6.6, P0.0 */
+            PORT_BIT_SETCLR(P15, 0x02, hash_on);    // P15.1
+            PORT_BIT_SETCLR(P6,  0x40, anaout_on);  // P6.6
+            PORT_BIT_SETCLR(P0,  0x01, check_on);   // P0.0
+            break;
+
+        case 4: /* P15.0, P6.7, P15.6 */
+            PORT_BIT_SETCLR(P15, 0x01, hash_on);    // P15.0
+            PORT_BIT_SETCLR(P6,  0x80, anaout_on);  // P6.7
+            PORT_BIT_SETCLR(P15, 0x40, check_on);   // P15.6
+            break;
+
+        case 5: /* P12.0, P4.4, P3.0 */
+            PORT_BIT_SETCLR(P12, 0x01, hash_on);    // P12.0
+            PORT_BIT_SETCLR(P4,  0x10, anaout_on);  // P4.4
+            PORT_BIT_SETCLR(P3,  0x01, check_on);   // P3.0
+            break;
+
+        case 6: /* P12.5, P4.3, P3.2 */
+            PORT_BIT_SETCLR(P12, 0x20, hash_on);    // P12.5
+            PORT_BIT_SETCLR(P4,  0x08, anaout_on);  // P4.3
+            PORT_BIT_SETCLR(P3,  0x04, check_on);   // P3.2
+            break;
+
+        case 7: /* P0.1, P4.2, P0.3 */
+            PORT_BIT_SETCLR(P0,  0x02, hash_on);    // P0.1
+            PORT_BIT_SETCLR(P4,  0x04, anaout_on);  // P4.2
+            PORT_BIT_SETCLR(P0,  0x08, check_on);   // P0.3
+            break;
+
+        case 8: /* P12.6, P4.1, P7.0 */
+            PORT_BIT_SETCLR(P12, 0x40, hash_on);    // P12.6
+            PORT_BIT_SETCLR(P4,  0x02, anaout_on);  // P4.1
+            PORT_BIT_SETCLR(P7,  0x01, check_on);   // P7.0
+            break;
+
+        case 9: /* P12.7, P5.0, P7.1 */
+            PORT_BIT_SETCLR(P12, 0x80, hash_on);    // P12.7
+            PORT_BIT_SETCLR(P5,  0x01, anaout_on);  // P5.0
+            PORT_BIT_SETCLR(P7,  0x02, check_on);   // P7.1
+            break;
+
+        case 10: /* P0.2, P5.1, P10.4 */
+            PORT_BIT_SETCLR(P0,  0x04, hash_on);    // P0.2
+            PORT_BIT_SETCLR(P5,  0x02, anaout_on);  // P5.1
+            PORT_BIT_SETCLR(P10, 0x10, check_on);   // P10.4
+            break;
+
+        case 11: /* P10.3, P5.2, P10.5 */
+            PORT_BIT_SETCLR(P10, 0x08, hash_on);    // P10.3
+            PORT_BIT_SETCLR(P5,  0x04, anaout_on);  // P5.2
+            PORT_BIT_SETCLR(P10, 0x20, check_on);   // P10.5
+            break;
+
+        case 12: /* P10.2, P6.0, P10.6 */
+            PORT_BIT_SETCLR(P10, 0x04, hash_on);    // P10.2
+            PORT_BIT_SETCLR(P6,  0x01, anaout_on);  // P6.0
+            PORT_BIT_SETCLR(P10, 0x40, check_on);   // P10.6
+            break;
+
+        case 13: /* P10.1, P6.1, P10.7 */
+            PORT_BIT_SETCLR(P10, 0x02, hash_on);    // P10.1
+            PORT_BIT_SETCLR(P6,  0x02, anaout_on);  // P6.1
+            PORT_BIT_SETCLR(P10, 0x80, check_on);   // P10.7
+            break;
+
+        case 14: /* P10.0, P7.2, P5.7 */
+            PORT_BIT_SETCLR(P10, 0x01, hash_on);    // P10.0
+            PORT_BIT_SETCLR(P7,  0x04, anaout_on);  // P7.2
+            PORT_BIT_SETCLR(P5,  0x80, check_on);   // P5.7
+            break;
+
+        case 15: /* P9.7, P7.3, P5.6 */
+            PORT_BIT_SETCLR(P9,  0x80, hash_on);    // P9.7
+            PORT_BIT_SETCLR(P7,  0x08, anaout_on);  // P7.3
+            PORT_BIT_SETCLR(P5,  0x40, check_on);   // P5.6
+            break;
+
+        case 16: /* P9.6, P7.5, P5.5 */
+            PORT_BIT_SETCLR(P9,  0x40, hash_on);    // P9.6
+            PORT_BIT_SETCLR(P7,  0x20, anaout_on);  // P7.5
+            PORT_BIT_SETCLR(P5,  0x20, check_on);   // P5.5
+            break;
+
+        case 17: /* P9.5, P7.4, P5.4 */
+            PORT_BIT_SETCLR(P9,  0x20, hash_on);    // P9.5
+            PORT_BIT_SETCLR(P7,  0x10, anaout_on);  // P7.4
+            PORT_BIT_SETCLR(P5,  0x10, check_on);   // P5.4
+            break;
+
+        case 18: /* P9.4, P7.6, P1.0 */
+            PORT_BIT_SETCLR(P9,  0x10, hash_on);    // P9.4
+            PORT_BIT_SETCLR(P7,  0x40, anaout_on);  // P7.6
+            PORT_BIT_SETCLR(P1,  0x01, check_on);   // P1.0
+            break;
+
+        case 19: /* P9.3, P7.7, P1.3 */
+            PORT_BIT_SETCLR(P9,  0x08, hash_on);    // P9.3
+            PORT_BIT_SETCLR(P7,  0x80, anaout_on);  // P7.7
+            PORT_BIT_SETCLR(P1,  0x08, check_on);   // P1.3
+            break;
+
+        case 20: /* P9.2, P13.0, P1.4 */
+            PORT_BIT_SETCLR(P9,  0x04, hash_on);    // P9.2
+            PORT_BIT_SETCLR(P13, 0x01, anaout_on);  // P13.0
+            PORT_BIT_SETCLR(P1,  0x10, check_on);   // P1.4
+            break;
+
+        default:
+            break;
+    }
 }
 
-void GateCtrl_Init(void)
+void Cal_Init(void)
 {
-    // 공통핀 출력 설정
+    uint8_t i;
-    ALL_PM &= (uint8_t)~ALL_MASK;
-    ZAC_PM &= (uint8_t)~ZAC_MASK;
-
-    // 기본 OFF
-    GateCtrl_SetAll(0);
-    GateCtrl_SetZacwire(0);
 
-    // 채널 관련 모듈 init
+    // P4.7 = 0, P15.7 = 0 (다른 비트 보존!)
-    hash_init();
+    PORT_BIT_SETCLR(P4,  0x80, 0);
-    check_pin_init();
+    PORT_BIT_SETCLR(P15, 0x80, 0);
 
-    // ANAOUT_Init()는 main에서 한다면 여기서 중복 호출 X
+    for (i = 1; i <= 20; i++) {
+        Gate_SetByNum(i, 0, 0, 1);  // hash=0, anaout=0, check=1
+    }
 }
 
-void GateCtrl_SetAll(uint8_t on)
+void Eol_Init(void)
 {
-    write_port(&P4, ALL_MASK, on);
+    uint8_t i;
-}
 
-void GateCtrl_SetZacwire(uint8_t on)
+    // P4.7 = 1, P15.7 = 0 (다른 비트 보존!)
-{
+    PORT_BIT_SETCLR(P4,  0x80, 1);
-    write_port(&P15, ZAC_MASK, on);
+    PORT_BIT_SETCLR(P15, 0x80, 0);
-}
 
-void GateCtrl_ClearChannelPins(void)
+    for (i = 1; i <= 20; i++) {
-{
+        Gate_SetByNum(i, 0, 0, 1);  // hash=0, anaout=0, check=1
-    hash_all_off();
+    }
-    check_all_off();
-    anaout_all_off();
 }
 
 void GateCtrl_SelectChannel(uint8_t ch)
 {
     if (ch < 1 || ch > 20) return;
-
     s_ch = ch;
-
-    GateCtrl_ClearChannelPins();
 }
 
-void GateCtrl_Anaout(uint8_t on)
-{
-    anaout_pin(s_ch, on);
-}
 
-void GateCtrl_Hash(uint8_t on)
-{
-    hash_pin(s_ch, on);
-}
-
-void GateCtrl_Check(uint8_t on)
-{
-    check_pin(s_ch, on);
-}

gatectrl.h

@@ -3,38 +3,13 @@
 
 #include "r_cg_macrodriver.h"
 #include "r_cg_port.h"
-#include "anaout.h"
+#include <stdint.h>
-#include "hash_pin.h"
-#include "check_pin.h"
 
-#ifdef __cplusplus
+void Gate_SetByNum(uint8_t ch, uint8_t hash_on, uint8_t anaout_on, uint8_t check_on);
-extern "C" {
-#endif
-
-void GateCtrl_Init(void);
 
-/** ???: ALL (P47) */
+void Cal_Init(void);
-void GateCtrl_SetAll(uint8_t on);
+void Eol_Init(void);
-
-/** ???: ZACWIRE (P157) */
-void GateCtrl_SetZacwire(uint8_t on);
 
 void GateCtrl_SelectChannel(uint8_t ch);
 
-/** ?? ??? ??? ANAOUT ?? (?? ?? ???) */
-void GateCtrl_Anaout(uint8_t on);
-
-/** ?? ??? ??? #? ?? */
-void GateCtrl_Hash(uint8_t on);
-
-/** ?? ??? ??? CHECK? ?? */
-void GateCtrl_Check(uint8_t on);
-
-/** (??) #/CHECK ?? OFF */
-void GateCtrl_ClearChannelPins(void);
-
-#ifdef __cplusplus
-}
 #endif
-
-#endif /* GATECTRL_H */

hash_pin.c

@@ -1,88 +0,0 @@
-#include "hash_pin.h"
-
-#define BIT(n)   (1u << (n))
-
-static void hash_write_port(volatile uint8_t *port, uint8_t mask, uint8_t on)
-{
-    if (on) *port |=  mask;
-    else    *port &= (uint8_t)~mask;
-}
-
-static void hash_set_output_pm(volatile uint8_t *pm, uint8_t mask)
-{
-    *pm &= (uint8_t)~mask; // PM bit=0 -> output
-}
-
-void hash_init(void)
-{
-    // #1~#4 : P15.3~P15.0
-    hash_set_output_pm(&PM15, (uint8_t)(BIT(0)|BIT(1)|BIT(2)|BIT(3)));
-
-    // #5 : P12.0
-    hash_set_output_pm(&PM12, (uint8_t)BIT(0));
-
-    // #6 : P12.5
-    hash_set_output_pm(&PM12, (uint8_t)BIT(5));
-
-    // #7 : P0.1
-    hash_set_output_pm(&PM0, (uint8_t)BIT(1));
-
-    // #8 : P12.6
-    hash_set_output_pm(&PM12, (uint8_t)BIT(6));
-
-    // #9 : P12.7
-    hash_set_output_pm(&PM12, (uint8_t)BIT(7));
-
-    // #10 : P0.2
-    hash_set_output_pm(&PM0, (uint8_t)BIT(2));
-
-    // #11~#14 : P10.3~P10.0
-    hash_set_output_pm(&PM10, (uint8_t)(BIT(0)|BIT(1)|BIT(2)|BIT(3)));
-
-    // #15~#20 : P9.7,6,5,4,3,2
-    hash_set_output_pm(&PM9, (uint8_t)(BIT(7)|BIT(6)|BIT(5)|BIT(4)|BIT(3)|BIT(2)));
-
-    hash_all_off();
-}
-
-void hash_all_off(void)
-{
-    // P15.0~3 OFF
-    P15 &= (uint8_t)~(BIT(0)|BIT(1)|BIT(2)|BIT(3));
-    // P12.0,5,6,7 OFF
-    P12 &= (uint8_t)~(BIT(0)|BIT(5)|BIT(6)|BIT(7));
-    // P0.1,2 OFF
-    P0  &= (uint8_t)~(BIT(1)|BIT(2));
-    // P10.0~3 OFF
-    P10 &= (uint8_t)~(BIT(0)|BIT(1)|BIT(2)|BIT(3));
-    // P9.2~7 OFF
-    P9  &= (uint8_t)~(BIT(2)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7));
-}
-
-void hash_pin(uint8_t ch, uint8_t on)
-{
-    switch (ch)
-    {
-        case 1:  hash_write_port(&P15, BIT(3), on); break; // #1 : P153
-        case 2:  hash_write_port(&P15, BIT(2), on); break; // #2 : P152
-        case 3:  hash_write_port(&P15, BIT(1), on); break; // #3 : P151
-        case 4:  hash_write_port(&P15, BIT(0), on); break; // #4 : P150
-        case 5:  hash_write_port(&P12, BIT(0), on); break; // #5 : P120
-        case 6:  hash_write_port(&P12, BIT(5), on); break; // #6 : P125
-        case 7:  hash_write_port(&P0,  BIT(1), on); break; // #7 : P01
-        case 8:  hash_write_port(&P12, BIT(6), on); break; // #8 : P126
-        case 9:  hash_write_port(&P12, BIT(7), on); break; // #9 : P127
-        case 10: hash_write_port(&P0,  BIT(2), on); break; // #10: P02
-        case 11: hash_write_port(&P10, BIT(3), on); break; // #11: P103
-        case 12: hash_write_port(&P10, BIT(2), on); break; // #12: P102
-        case 13: hash_write_port(&P10, BIT(1), on); break; // #13: P101
-        case 14: hash_write_port(&P10, BIT(0), on); break; // #14: P100
-        case 15: hash_write_port(&P9,  BIT(7), on); break; // #15: P97
-        case 16: hash_write_port(&P9,  BIT(6), on); break; // #16: P96
-        case 17: hash_write_port(&P9,  BIT(5), on); break; // #17: P95
-        case 18: hash_write_port(&P9,  BIT(4), on); break; // #18: P94
-        case 19: hash_write_port(&P9,  BIT(3), on); break; // #19: P93
-        case 20: hash_write_port(&P9,  BIT(2), on); break; // #20: P92
-        default: /* ignore */ break;
-    }
-}

hash_pin.h

@@ -1,26 +0,0 @@
-#ifndef HASH_H
-#define HASH_H
-
-#include "r_cg_macrodriver.h"
-#include "r_cg_port.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-void hash_init(void);
-
-/*
-  채널(ch=1~20)의 #핀을 on/off
-  예) ch=2 -> #2(P152) 제어
- */
-void hash_pin(uint8_t ch, uint8_t on);
-
-/* (옵션) #1~#20 전체 OFF */
-void hash_all_off(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif 

i2c.c

@@ -36,7 +36,7 @@ void disable(void){
     // I2C 마스터 송신
     if (R_IICA0_Master_Send(SLAVE_ADDR << 1, dis, sizeof(dis), 100) != MD_OK)
     {
-        uart_send_string("I2C Send Failed\r\n");
+        HOST_PRINT("I2C Send Failed\r\n");
         return;
     }
 }
@@ -84,152 +84,6 @@ void I2C_DisablePower(void) {
 }
 
 
-/**
- * 함수명: I2C_A_Command_Mode_receiveData
- * 목적: I2C 장치에서 ADC 데이터와 명령 리스트를 읽고,
- *       최종적으로 UART로 데이터를 전송한다.
- *
- * 매개변수:
- *   - tx_data : 사용자 명령(UserCmd) 데이터 배열
- *   - tx_len  : 사용자 명령 데이터 길이
- *   - id      : I2C 슬레이브 장치 주소
- *
- * 반환값: 없음 (void)
- *
- * 동작 방식:
- *   1) ADC 읽기
- *      - ADC_ReadAndSend_UART() 호출로 4채널 ADC 값을 읽음
- *      - 읽은 값이 4개가 아니면 오류 메시지 UART 출력 후 종료
- *      - TOP, BRP, BRN, BRP-BRN, BOT 값 순서대로 UART 문자열 구성
- *
- *   2) CMD_LIST 순서대로 I2C 읽기
- *      - CMD_LIST는 장치 내부 명령 6개 정의
- *      - R_IICA0_Master_Send()로 명령 전송
- *      - R_IICA0_Master_Receive()로 응답 읽음
- *      - 읽은 값(rx[1], rx[2])을 UART 문자열에 추가
- *
- *   3) 사용자 CMD 처리
- *      - tx_data와 tx_len이 유효하면 해당 데이터를 I2C 장치로 전송
- *      - 응답을 rx 배열로 읽고 UART 문자열에 추가
- *      - 없으면 "0000"으로 표시
- *
- *   4) 최종 출력
- *      - 완성된 문자열(line)을 UART로 전송
- *      - 각 단계마다 적절한 delay로 통신 안정성 확보
- *
- * 참고:
- *   - RAM_BYTES는 I2C 응답 버퍼 크기
- *   - UART 출력은 ","로 각 값 구분 후, 마지막에 CRLF 추가
- *   - ADC와 I2C 읽기 순서가 고정되어 있어 코드만 봐도 데이터 처리 흐름 이해 가능
- */
-void I2C_A_Command_Mode_receiveData(const uint8_t *tx_data, uint8_t tx_len,uint8_t id )
-{
-    uint8_t CMD_LIST[6][3] = {
-        {0x2E, 0x00, 0x00}, // BR
-        {0x2E, 0x01, 0x00}, // BR_AZ
-        {0x2E, 0x02, 0x00}, // T_RAW
-        {0x2E, 0x16, 0x00}, // Y_data
-        {0x2E, 0x41, 0x00},  // BR_AOUT
-        {0x2E, 0x40, 0x00}
-    };
-    
-    char line[128];
-    size_t n = 0;
-    uint8_t rx[RAM_BYTES] = {0};
-    int j;
-
-    // 1) ADC 읽기 (4채널)
-	ADC_ReadAndSend_UART();
-	if (g_adc_len != 4) {   // TOP, BRP, BRN, BOT만 읽음
-	    uart_send_string("Err:adc_count\r\n");
-	    return;
-	}
-
-	// 2) UART 문자열 구성 (5개 값)
-	for (j = 0; j < 5; j++) {
-	    float v = 0.0f;
-
-	    switch (j) {
-	        case 0: // 1번: TOP
-	            v = g_adc_bytes[0];
-	            break;
-	        case 1: // 2번: BRP
-	            v = g_adc_bytes[1];
-	            break;
-	        case 2: // 3번: BRN
-	            v = g_adc_bytes[2];
-	            break;
-	        case 3: // 4번: BRP - BRN
-	            v = g_adc_bytes[1] - g_adc_bytes[2];
-	            break;
-	        case 4: // 5번: BOT
-	            v = g_adc_bytes[3];
-	            break;
-	    }
-
-    n += sprintf(&line[n], "%.2f", v);
-
-    
-        line[n++] = ',';
-    
-}
-
- 
-    delay(100000);
-
-
-    // 2) CMD_LIST 순서대로 I2C 읽기
-	for (j = 0; j < 6; j++) {
-	    if (R_IICA0_Master_Send((id << 1), CMD_LIST[j], 3, 100) != MD_OK) {
-	        uart_send_string("I2C Send Failed\r\n");
-	        return;
-	    }
-	    delay(10000);
-
-	    if (R_IICA0_Master_Receive((id << 1), rx, RAM_BYTES, 100) != MD_OK) {
-	        uart_send_string("I2C Receive Failed\r\n");
-	        return;
-	    }
-	    delay(10000);
-
-	    n += sprintf(&line[n], "%02X%02X", rx[1], rx[2]);
-	    
-	    // 마지막 CMD 뒤에는 쉼표 붙이지 않음
-	    if (j < 5) {
-	        line[n++] = ',';
-	    }
-	}
-
-	// 3) UserCmd 처리
-	line[n++] = ','; // UserCmd 앞 쉼표
-	if (tx_data != NULL && tx_len > 0) {
-	    if (R_IICA0_Master_Send((id << 1), tx_data, tx_len, 100) != MD_OK) {
-	        uart_send_string("I2C UserCmd Send Failed\r\n");
-	        return;
-	    }
-	    delay(100000);
-
-	    if (R_IICA0_Master_Receive((id << 1), rx, RAM_BYTES, 100) != MD_OK) {
-	        uart_send_string("I2C UserCmd Receive Failed\r\n");
-	        return;
-	    }
-	    delay(10000);
-
-	    n += sprintf(&line[n], "%02X%02X", rx[1], rx[2]);
-	} else {
-	    n += sprintf(&line[n], "0000");
-	}
-
-    // 마지막에 CRLF
-    line[n++] = '\r';
-    line[n++] = '\n';
-    line[n] = '\0';
-
-    uart_send_string(line);
-    delay(10000);
-   
-}
-
 /**
  * 함수명: I2C_Diagnostic
  * 목적: I2C 장치의 진단용 데이터를 읽어 UART로 출력
@@ -285,13 +139,13 @@ void I2C_Diagnostic(uint8_t id )
     // 2) CMD_LIST 순서대로 I2C 읽기
 	for (j = 0; j < 10; j++) {
 	    if (R_IICA0_Master_Send((id << 1), CMD_LIST[j], 3, 100) != MD_OK) {
-	        uart_send_string("I2C Send Failed\r\n");
+	        HOST_PRINT("I2C Send Failed\r\n");
 	        return;
 	    }
 	    delay(10000);
 
 	    if (R_IICA0_Master_Receive((id << 1), rx, RAM_BYTES, 100) != MD_OK) {
-	        uart_send_string("I2C Receive Failed\r\n");
+	        HOST_PRINT("I2C Receive Failed\r\n");
 	        return;
 	    }
 	    delay(10000);
@@ -311,7 +165,7 @@ void I2C_Diagnostic(uint8_t id )
     line[n++] = '\n';
     line[n] = '\0';
 
-    uart_send_string(line);
+    HOST_PRINT(line);
     delay(10000);
    
 }
@@ -358,12 +212,12 @@ void I2C_T_Command_Mode_receiveData(const uint8_t *tx_data, uint8_t tx_len,uint8
 
     if (R_IICA0_Master_Send((id << 1), tx_data, tx_len, 100) != MD_OK)
     {
-        uart_send_string("I2C Send Failed\r\n");
+        HOST_PRINT("I2C Send Failed\r\n");
         return;
     }
 
  
-    uart_send_string("51\r\n");
+    HOST_PRINT("51\r\n");
     
 
 
@@ -403,11 +257,11 @@ void I2C_Command_Mode_receiveData(const uint8_t *tx_data, uint8_t tx_len,uint8_t
     
     if (R_IICA0_Master_Send((id << 1), tx_data, tx_len, 100) != MD_OK)
     {
-        uart_send_string("I2C Send Failed\r\n");
+        HOST_PRINT("I2C Send Failed\r\n");
         return;
     }
 
-    uart_send_string("51\r\n");
+    HOST_PRINT("51\r\n");
 }
 
 
@@ -450,20 +304,20 @@ void I2C_Command_Mode_Send(uint8_t tx_len, uint8_t id)
     uint8_t status = 0x00;
     int tries = 0;
 
-    /* ★추가: 버퍼 초기화 (기존 로직/출력 형식 유지) */
+    /* 버퍼 초기화 (기존 로직/출력 형식 유지) */
     memset(uart_buf, 0, sizeof(uart_buf));
     memset(tmp_buf,   0, sizeof(tmp_buf));
     memset(rx,     0x00, sizeof(rx));   // 가드 패턴(0x00으로 해도 무방)
 
     if (R_IICA0_Master_Receive((id << 1), rx, (uint8_t)(tx_len), 1000) != MD_OK) {
-        uart_send_string("I2C Receive Failed\r\n");
+        HOST_PRINT("I2C Receive Failed\r\n");
         return;
     }
     delay(1000000);
 
     sprintf(uart_buf, "%02X ", rx[0]);
     strcpy(tmp_buf, uart_buf);
-    uart_send_string(uart_buf);
+    HOST_PRINT(uart_buf);
     delay(10000);
 
     for (i = 1; i < (tx_len); i += 2) {
@@ -472,16 +326,16 @@ void I2C_Command_Mode_Send(uint8_t tx_len, uint8_t id)
             va1 = rx[i + 1];
             delay(10000);
             sprintf(uart_buf, "%02X%02X ", va0, va1);
-            uart_send_string(uart_buf);
+            HOST_PRINT(uart_buf);
             delay(10000);
         } else {
             delay(10000);
             sprintf(uart_buf, "%02X", va0);
             strcpy(tmp_buf, uart_buf);
-            uart_send_string(uart_buf);
+            HOST_PRINT(uart_buf);
             delay(10000);
         }
     }
-    uart_send_string("\r\n");
+    HOST_PRINT("\r\n");
 }
 

multical.rcpe

@@ -24,9 +24,6 @@
         <Path>r_cg_cgc.h</Path>
         <Path>r_cg_serial.h</Path>
         <Path>r_cg_wdt.h</Path>
-        <Path>r_cg_adc.c</Path>
-        <Path>r_cg_adc_user.c</Path>
-        <Path>r_cg_adc.h</Path>
         <Path>r_cg_port.c</Path>
         <Path>r_cg_port_user.c</Path>
         <Path>r_cg_port.h</Path>
@@ -48,10 +45,6 @@
           <Path>delay.c</Path>
           <Path>delay.h</Path>
         </Category>
-        <Category Name="anaout">
-          <Path>anaout.h</Path>
-          <Path>anaout.c</Path>
-        </Category>
         <Path>common.h</Path>
         <Category Name="dipSwitch">
           <Path>dipSwitch.c</Path>
@@ -61,14 +54,6 @@
           <Path>gatectrl.h</Path>
           <Path>gatectrl.c</Path>
         </Category>
-        <Category Name="hash">
-          <Path>hash_pin.h</Path>
-          <Path>hash_pin.c</Path>
-        </Category>
-        <Category Name="check">
-          <Path>check_pin.h</Path>
-          <Path>check_pin.c</Path>
-        </Category>
       </Category>
     </Files>
     <DebugOptions>
@@ -92,19 +77,14 @@
           <Path>DefaultBuild\r_cg_serial_user.obj</Path>
           <Path>DefaultBuild\r_cg_wdt.obj</Path>
           <Path>DefaultBuild\r_cg_wdt_user.obj</Path>
-          <Path>DefaultBuild\r_cg_adc.obj</Path>
-          <Path>DefaultBuild\r_cg_adc_user.obj</Path>
           <Path>DefaultBuild\r_cg_port.obj</Path>
           <Path>DefaultBuild\r_cg_port_user.obj</Path>
-          <Path>DefaultBuild\anaout.obj</Path>
           <Path>DefaultBuild\owi.obj</Path>
           <Path>DefaultBuild\i2c.obj</Path>
           <Path>DefaultBuild\uart.obj</Path>
           <Path>DefaultBuild\delay.obj</Path>
           <Path>DefaultBuild\dipSwitch.obj</Path>
           <Path>DefaultBuild\gatectrl.obj</Path>
-          <Path>DefaultBuild\hash_pin.obj</Path>
-          <Path>DefaultBuild\check_pin.obj</Path>
         </LinkOrder>
         <CommonOptions>
           <IncludePathForC>..\..\Documents\카카오톡 받은 파일\IDH1.1\IDH1.1</IncludePathForC>
@@ -249,11 +229,11 @@
     &lt;COMP_ADPC_USEDPIN Name="COMP_ADPC_USEDPIN" Text="false" /&gt;
     &lt;DA_ADPC_USEDPIN Name="DA_ADPC_USEDPIN" Text="false" /&gt;
     &lt;DA_INUSE Name="DA_INUSE" Text="false" /&gt;
-    &lt;AD_ADPC_USEDPIN Name="AD_ADPC_USEDPIN" Text="ANI0,ANI1,ANI2,ANI3,ANI4,ANI5,ANI6,ANI7,ANI8,ANI9,ANI10,ANI11,ANI12,ANI13,ANI14,ANI15,ANI16,ANI17,ANI18,ANI19,ANI20,ANI21,ANI22,ANI23," /&gt;
+    &lt;AD_ADPC_USEDPIN Name="AD_ADPC_USEDPIN" Text="" /&gt;
-    &lt;AD_ADS_USEDPIN Name="AD_ADS_USEDPIN" Text="ANI0," /&gt;
+    &lt;AD_ADS_USEDPIN Name="AD_ADS_USEDPIN" Text="" /&gt;
     &lt;ADPCForPort3 Name="ADPCForPort3" Value="255" Comment="ADPCForPort3" /&gt;
     &lt;ADPCForPort8 Name="ADPCForPort8" Value="255" Comment="ADPCForPort8" /&gt;
-    &lt;ADPCForPort9 Name="ADPCForPort9" Value="255" Comment="ADPCForPort9" /&gt;
+    &lt;ADPCForPort9 Name="ADPCForPort9" Value="13" Comment="ADPCForPort9" /&gt;
     &lt;ADPCForKey Name="ADPCForKey" Value="255" Comment="ADPCForKey" /&gt;
     &lt;OnChipDebugTraceDTC Name="GTraceRam" Text="2" Trigger="ocdtraceram"&gt;
       &lt;Effect&gt;
@@ -403,7 +383,7 @@
     &lt;/RTC1HZ&gt;
     &lt;RXD0 Name="RXD0" Text="enable" /&gt;
     &lt;ProjectName Name="PrjName" Text="multical" /&gt;
-    &lt;ProjectPath Name="PrjPath" Text="C:\Users\COMPUTER1\OneDrive\Desktop\Amosense_Firmware1" /&gt;
+    &lt;ProjectPath Name="PrjPath" Text="C:\Users\temp\Desktop\Amosense_Firmware 최종" /&gt;
     &lt;ProjectKind Name="PrjKind" Text="Project78K0R" /&gt;
     &lt;DeviceName Name="DeviceName" Fixed="" Text="RL78F14" /&gt;
     &lt;MCUName Name="MCUName" Text="RL78F14_100pin" /&gt;
@@ -454,7 +434,7 @@
     &lt;ADPCForPort5 Name="ADPCForPort5" Value="255" /&gt;
     &lt;ADPCForPort6 Name="ADPCForPort6" Value="255" /&gt;
     &lt;ADPCForPort7 Name="ADPCForPort7" Value="255" /&gt;
-    &lt;ADPCForPort10 Name="ADPCForPort10" Value="255" /&gt;
+    &lt;ADPCForPort10 Name="ADPCForPort10" Value="19" /&gt;
     &lt;ADPCForPort12 Name="ADPCForPort12" Value="255" /&gt;
     &lt;ADPCForPort13 Name="ADPCForPort13" Value="255" /&gt;
     &lt;ADPCForPort14 Name="ADPCForPort14" Value="255" /&gt;
@@ -494,107 +474,107 @@
       &lt;/CGC&gt;
       &lt;PORT&gt;
         &lt;Port0 Chip="RL78F14_100pin" Pullup="true"&gt;
-          &lt;P00 Name="P00/TI05/TO05/INTP9" AltFunc="" Point="I/O" /&gt;
+          &lt;P00 Name="P00/TI05/TO05/INTP9" AltFunc="P00" Point="I/O" /&gt;
-          &lt;P01 Name="P01/TI04/TO04" AltFunc="" Point="I/O" /&gt;
+          &lt;P01 Name="P01/TI04/TO04" AltFunc="P01" Point="I/O" /&gt;
-          &lt;P02 Name="P02/TI06/TO06" AltFunc="" Point="I/O" /&gt;
+          &lt;P02 Name="P02/TI06/TO06" AltFunc="P02" Point="I/O" /&gt;
-          &lt;P03 Name="P03" AltFunc="" Point="I/O" /&gt;
+          &lt;P03 Name="P03" AltFunc="P03" Point="I/O" /&gt;
         &lt;/Port0&gt;
         &lt;Port1 Pullup="true"&gt;
-          &lt;P10 Name="P10/TI13/TO13/TRJO0/_SCK10/SCL10/LTXD1/CTXD0" TTL="true" PITHL="true" Nch="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P10 Name="P10/TI13/TO13/TRJO0/_SCK10/SCL10/LTXD1/CTXD0" TTL="true" PITHL="true" Nch="true" AltFunc="P10" Point="I/O" /&gt;
           &lt;P11 Name="P11/TI12/TO12/TRDIOB0/SI10/SDA10/RXD1/LRXD1/CRXD0" TTL="true" PITHL="true" Nch="true" AltFunc="RXD1" Point="I/O" /&gt;
           &lt;P12 Name="P12/TI11/TO11/TRDIOD0/INTP5/SO10/TXD1/SNZOUT3" Nch="true" AltFunc="TXD1" Point="I/O" /&gt;
-          &lt;P13 Name="P13/TI04/TO04/TRDIOA0/TRDCLK0/SI01/SDA01/LTXD0" TTL="true" PITHL="true" Nch="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P13 Name="P13/TI04/TO04/TRDIOA0/TRDCLK0/SI01/SDA01/LTXD0" TTL="true" PITHL="true" Nch="true" AltFunc="P13" Point="I/O" /&gt;
-          &lt;P14 Name="P14/TI06/TO06/TRDIOC0/_SCK01/SCL01/LRXD0" TTL="true" PITHL="true" Nch="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P14 Name="P14/TI06/TO06/TRDIOC0/_SCK01/SCL01/LRXD0" TTL="true" PITHL="true" Nch="true" AltFunc="P14" Point="I/O" /&gt;
           &lt;P15 Name="P15/TI05/TO05/TRDIOA1/TRDIOA0/TRDCLK0/SO00/TXD0/TOOLTXD/RTC1HZ" Nch="true" AltFunc="TXD0" Point="I/O" /&gt;
           &lt;P16 Name="P16/TI02/TO02/TRDIOC1/SI00/SDA00/RXD0/TOOLRXD" TTL="true" PITHL="true" Nch="true" AltFunc="RXD0" Point="I/O" /&gt;
           &lt;P17 Name="P17/TI00/TO00/TRDIOB1/_SCK00/SCL00/INTP3" TTL="true" PITHL="true" Nch="true" AltFunc="" Point="I/O" /&gt;
         &lt;/Port1&gt;
         &lt;Port3 Chip="RL78F14_48pin,RL78F14_64pin,RL78F14_80pin,RL78F14_100pin"&gt;
-          &lt;P30 Name="P30/TI01/TO01/TRDIOD1/_SSI00/INTP2/SNZOUT0" TTL="true" PITHL="true" Pullup="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P30 Name="P30/TI01/TO01/TRDIOD1/_SSI00/INTP2/SNZOUT0" TTL="true" PITHL="true" Pullup="true" AltFunc="P30" Point="I/O" /&gt;
           &lt;P31 Name="P31/TI14/TO14/STOPST/INTP2" Pullup="true" AltFunc="" Point="I/O" /&gt;
-          &lt;P32 Name="P32/TI16/TO16/INTP7" Pullup="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P32 Name="P32/TI16/TO16/INTP7" Pullup="true" AltFunc="P32" Point="I/O" /&gt;
-          &lt;P33 Name="P33/AVREFP/ANI00" AltFunc="ANI0" Point="I/O" /&gt;
+          &lt;P33 Name="P33/AVREFP/ANI00" AltFunc="" Point="I/O" /&gt;
-          &lt;P34 Name="P34/AVREFM/ANI01" AltFunc="ANALOG_1" Point="I/O" /&gt;
+          &lt;P34 Name="P34/AVREFM/ANI01" AltFunc="" Point="I/O" /&gt;
         &lt;/Port3&gt;
         &lt;Port4 Chip="RL78F14_80pin,RL78F14_100pin" Pullup="true"&gt;
           &lt;P40 Name="P40/TOOL0" AltFunc="" Point="I/O" /&gt;
-          &lt;P41 Name="P41/TI10/TO10/TRJIO0/VCOUT0/SNZOUT2" AltFunc="" Point="I/O" /&gt;
+          &lt;P41 Name="P41/TI10/TO10/TRJIO0/VCOUT0/SNZOUT2" AltFunc="P41" Point="I/O" /&gt;
-          &lt;P42 Name="P42/LTXD0" AltFunc="" Point="I/O" /&gt;
+          &lt;P42 Name="P42/LTXD0" AltFunc="P42" Point="I/O" /&gt;
-          &lt;P43 Name="P43/LRXD0" PITHL="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P43 Name="P43/LRXD0" PITHL="true" AltFunc="P43" Point="I/O" /&gt;
-          &lt;P44 Name="P44/TI07/TO07" AltFunc="" Point="I/O" /&gt;
+          &lt;P44 Name="P44/TI07/TO07" AltFunc="P44" Point="I/O" /&gt;
           &lt;P45 Name="P45/TI10/TO10" AltFunc="" Point="I/O" /&gt;
           &lt;P46 Name="P46/TI12/TO12" AltFunc="" Point="I/O" /&gt;
           &lt;P47 Name="P47/INTP13" AltFunc="" Point="I/O" /&gt;
         &lt;/Port4&gt;
         &lt;Port5 Chip="RL78F14_80pin,RL78F14_100pin" Pullup="true"&gt;
-          &lt;P50 Name="P50/_SSI01/INTP3" PITHL="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P50 Name="P50/_SSI01/INTP3" PITHL="true" AltFunc="P50" Point="I/O" /&gt;
-          &lt;P51 Name="P51/SO01/INTP11" AltFunc="" Point="I/O" /&gt;
+          &lt;P51 Name="P51/SO01/INTP11" AltFunc="P51" Point="I/O" /&gt;
-          &lt;P52 Name="P52/_SCK01/SCL01/STOPST" PITHL="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P52 Name="P52/_SCK01/SCL01/STOPST" PITHL="true" AltFunc="P52" Point="I/O" /&gt;
           &lt;P53 Name="P53/SI01/SDA01/INTP10" PITHL="true" AltFunc="" Point="I/O" /&gt;
-          &lt;P54 Name="P54/TI11/TO11/_SSI10" TTL="true" PITHL="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P54 Name="P54/TI11/TO11/_SSI10" TTL="true" PITHL="true" AltFunc="P54" Point="I/O" /&gt;
-          &lt;P55 Name="P55/TI13/TO13" AltFunc="" Point="I/O" /&gt;
+          &lt;P55 Name="P55/TI13/TO13" AltFunc="P55" Point="I/O" /&gt;
-          &lt;P56 Name="P56/TI15/TO15/SNZOUT1" AltFunc="" Point="I/O" /&gt;
+          &lt;P56 Name="P56/TI15/TO15/SNZOUT1" AltFunc="P56" Point="I/O" /&gt;
-          &lt;P57 Name="P57/TI17/TO17/SNZOUT0" AltFunc="" Point="I/O" /&gt;
+          &lt;P57 Name="P57/TI17/TO17/SNZOUT0" AltFunc="P57" Point="I/O" /&gt;
         &lt;/Port5&gt;
         &lt;Port6 Chip="RL78F14_80pin,RL78F14_100pin" Pullup="true"&gt;
-          &lt;P60 Name="P60/_SCK00/SCL00" PITHL="true" Nch="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P60 Name="P60/_SCK00/SCL00" PITHL="true" Nch="true" AltFunc="P60" Point="I/O" /&gt;
-          &lt;P61 Name="P61/SI00/SDA00/RXD0" PITHL="true" Nch="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P61 Name="P61/SI00/SDA00/RXD0" PITHL="true" Nch="true" AltFunc="P61" Point="I/O" /&gt;
           &lt;P62 Name="P62/SO00/TXD0/SCLA0" TTL="true" PITHL="true" Nch="true" AltFunc="SCLA0" Point="I/O" /&gt;
           &lt;P63 Name="P63/_SSI00/SDAA0" TTL="true" PITHL="true" Nch="true" AltFunc="SDAA0" Point="I/O" /&gt;
-          &lt;P64 Name="P64/TI14/TO14/SNZOUT3" AltFunc="" Point="I/O" /&gt;
+          &lt;P64 Name="P64/TI14/TO14/SNZOUT3" AltFunc="P64" Point="I/O" /&gt;
-          &lt;P65 Name="P65/TI16/TO16/SNZOUT2" AltFunc="" Point="I/O" /&gt;
+          &lt;P65 Name="P65/TI16/TO16/SNZOUT2" AltFunc="P65" Point="I/O" /&gt;
-          &lt;P66 Name="P66/TI00/TO00" AltFunc="" Point="I/O" /&gt;
+          &lt;P66 Name="P66/TI00/TO00" AltFunc="P66" Point="I/O" /&gt;
-          &lt;P67 Name="P67/TI02/TO02" AltFunc="" Point="I/O" /&gt;
+          &lt;P67 Name="P67/TI02/TO02" AltFunc="P67" Point="I/O" /&gt;
         &lt;/Port6&gt;
         &lt;Port7 Chip="R5F10PLG,R5F10PLH,R5F10PLJ,R5F10PMG,R5F10PMH,R5F10PMJ,RL78F14_100pin" Pullup="true"&gt;
-          &lt;P70 Name="P70/ANI26/KR0/TI15/TO15/INTP8/SI11/SDA11/SNZOUT4/KR0" DIN="true" TTL="true" PITHL="true" Nch="true" AltFunc="ANI26" Point="I/O" /&gt;
+          &lt;P70 Name="P70/ANI26/KR0/TI15/TO15/INTP8/SI11/SDA11/SNZOUT4/KR0" DIN="true" TTL="true" PITHL="true" Nch="true" AltFunc="P70" Point="I/O" /&gt;
-          &lt;P71 Name="P71/ANI27/KR1/TI17/TO17/INTP6/_SCK11/SCL11/SNZOUT5/KR1" DIN="true" TTL="true" PITHL="true" Nch="true" AltFunc="ANI27" Point="I/O" /&gt;
+          &lt;P71 Name="P71/ANI27/KR1/TI17/TO17/INTP6/_SCK11/SCL11/SNZOUT5/KR1" DIN="true" TTL="true" PITHL="true" Nch="true" AltFunc="P71" Point="I/O" /&gt;
-          &lt;P72 Name="P72/ANI28/KR2/CTXD0/SO11/SNZOUT6/KR2" DIN="true" Nch="true" AltFunc="ANI28" Point="I/O" /&gt;
+          &lt;P72 Name="P72/ANI28/KR2/CTXD0/SO11/SNZOUT6/KR2" DIN="true" Nch="true" AltFunc="P72" Point="I/O" /&gt;
-          &lt;P73 Name="P73/ANI29/KR3/CRXD0/_SSI11/SNZOUT7/KR3" DIN="true" TTL="true" PITHL="true" AltFunc="ANI29" Point="I/O" /&gt;
+          &lt;P73 Name="P73/ANI29/KR3/CRXD0/_SSI11/SNZOUT7/KR3" DIN="true" TTL="true" PITHL="true" AltFunc="P73" Point="I/O" /&gt;
-          &lt;P74 Name="P74/ANI30/KR4/SO10/TXD1/KR4" DIN="true" AltFunc="ANI30" Point="I/O" /&gt;
+          &lt;P74 Name="P74/ANI30/KR4/SO10/TXD1/KR4" DIN="true" AltFunc="P74" Point="I/O" /&gt;
-          &lt;P75 Name="P75/KR5/SI10/SDA10/RXD1/KR5" PITHL="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P75 Name="P75/KR5/SI10/SDA10/RXD1/KR5" PITHL="true" AltFunc="P75" Point="I/O" /&gt;
-          &lt;P76 Name="P76/KR6/_SCK10/SCL10/KR6" PITHL="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P76 Name="P76/KR6/_SCK10/SCL10/KR6" PITHL="true" AltFunc="P76" Point="I/O" /&gt;
-          &lt;P77 Name="P77/KR7/_SSI10/INTP12/KR7" PITHL="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P77 Name="P77/KR7/_SSI10/INTP12/KR7" PITHL="true" AltFunc="P77" Point="I/O" /&gt;
         &lt;/Port7&gt;
         &lt;Port8 Chip="RL78F14_30pin,RL78F14_48pin,RL78F14_64pin,RL78F14_80pin,RL78F14_100pin"&gt;
-          &lt;P80 Name="P80/ANI02/ANO0" AltFunc="ANALOG_2" Point="I/O" /&gt;
+          &lt;P80 Name="P80/ANI02/ANO0" AltFunc="" Point="I/O" /&gt;
-          &lt;P81 Name="P81/ANI03/IVCMP00" AltFunc="ANALOG_3" Point="I/O" /&gt;
+          &lt;P81 Name="P81/ANI03/IVCMP00" AltFunc="" Point="I/O" /&gt;
-          &lt;P82 Name="P82/ANI04/IVCMP01" AltFunc="ANALOG_4" Point="I/O" /&gt;
+          &lt;P82 Name="P82/ANI04/IVCMP01" AltFunc="" Point="I/O" /&gt;
-          &lt;P83 Name="P83/ANI05/IVCMP02" AltFunc="ANALOG_5" Point="I/O" /&gt;
+          &lt;P83 Name="P83/ANI05/IVCMP02" AltFunc="" Point="I/O" /&gt;
-          &lt;P84 Name="P84/ANI06/IVCMP03" AltFunc="ANALOG_6" Point="I/O" /&gt;
+          &lt;P84 Name="P84/ANI06/IVCMP03" AltFunc="" Point="I/O" /&gt;
-          &lt;P85 Name="P85/ANI07/IVREF0" AltFunc="ANALOG_7" Point="I/O" /&gt;
+          &lt;P85 Name="P85/ANI07/IVREF0" AltFunc="" Point="I/O" /&gt;
-          &lt;P86 Name="P86/ANI08" AltFunc="ANALOG_8" Point="I/O" /&gt;
+          &lt;P86 Name="P86/ANI08" AltFunc="" Point="I/O" /&gt;
-          &lt;P87 Name="P87/ANI09" AltFunc="ANALOG_9" Point="I/O" /&gt;
+          &lt;P87 Name="P87/ANI09" AltFunc="" Point="I/O" /&gt;
         &lt;/Port8&gt;
         &lt;Port9 Chip="R5F10PMG,R5F10PMH,R5F10PMJ,R5F10PPE,R5F10PPF,R5F10PPG,R5F10PPH,R5F10PPJ"&gt;
-          &lt;P90 Name="P90/ANI10" AltFunc="ANALOG_10" Point="I/O" /&gt;
+          &lt;P90 Name="P90/ANI10" AltFunc="" Point="I/O" /&gt;
-          &lt;P91 Name="P91/ANI11" AltFunc="ANALOG_11" Point="I/O" /&gt;
+          &lt;P91 Name="P91/ANI11" AltFunc="" Point="I/O" /&gt;
-          &lt;P92 Name="P92/ANI12" AltFunc="ANALOG_12" Point="I/O" /&gt;
+          &lt;P92 Name="P92/ANI12" AltFunc="P92" Point="I/O" /&gt;
-          &lt;P93 Name="P93/ANI13" AltFunc="ANALOG_13" Point="I/O" /&gt;
+          &lt;P93 Name="P93/ANI13" AltFunc="P93" Point="I/O" /&gt;
-          &lt;P94 Name="P94/ANI14" AltFunc="ANALOG_14" Point="I/O" /&gt;
+          &lt;P94 Name="P94/ANI14" AltFunc="P94" Point="I/O" /&gt;
-          &lt;P95 Name="P95/ANI15" AltFunc="ANALOG_15" Point="I/O" /&gt;
+          &lt;P95 Name="P95/ANI15" AltFunc="P95" Point="I/O" /&gt;
-          &lt;P96 Name="P96/ANI16" AltFunc="ANALOG_16" Point="I/O" /&gt;
+          &lt;P96 Name="P96/ANI16" AltFunc="P96" Point="I/O" /&gt;
-          &lt;P97 Name="P97/ANI17" AltFunc="ANALOG_17" Point="I/O" /&gt;
+          &lt;P97 Name="P97/ANI17" AltFunc="P97" Point="I/O" /&gt;
         &lt;/Port9&gt;
         &lt;Port10 Chip="RL78F14_100pin"&gt;
-          &lt;P100 Name="P100/ANI18" AltFunc="ANALOG_18" Point="I/O" /&gt;
+          &lt;P100 Name="P100/ANI18" AltFunc="P100" Point="I/O" /&gt;
-          &lt;P101 Name="P101/ANI19" AltFunc="ANALOG_19" Point="I/O" /&gt;
+          &lt;P101 Name="P101/ANI19" AltFunc="P101" Point="I/O" /&gt;
-          &lt;P102 Name="P102/ANI20" AltFunc="ANALOG_20" Point="I/O" /&gt;
+          &lt;P102 Name="P102/ANI20" AltFunc="P102" Point="I/O" /&gt;
-          &lt;P103 Name="P103/ANI21" AltFunc="ANALOG_21" Point="I/O" /&gt;
+          &lt;P103 Name="P103/ANI21" AltFunc="P103" Point="I/O" /&gt;
-          &lt;P104 Name="P104/ANI22" AltFunc="ANALOG_22" Point="I/O" /&gt;
+          &lt;P104 Name="P104/ANI22" AltFunc="P104" Point="I/O" /&gt;
-          &lt;P105 Name="P105/ANI23" AltFunc="ANALOG_23" Point="I/O" /&gt;
+          &lt;P105 Name="P105/ANI23" AltFunc="P105" Point="I/O" /&gt;
-          &lt;P106 Name="P106/LTXD1" Pullup="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P106 Name="P106/LTXD1" Pullup="true" AltFunc="P106" Point="I/O" /&gt;
-          &lt;P107 Name="P107/LRXD1" PITHL="true" Pullup="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P107 Name="P107/LRXD1" PITHL="true" Pullup="true" AltFunc="P107" Point="I/O" /&gt;
         &lt;/Port10&gt;
         &lt;Port12 Chip="RL78F14_100pin"&gt;
-          &lt;P120 Name="P120/ANI25/TI07/TO07/TRDIOD0/SO01/INTP4" DIN="true" Nch="true" Pullup="true" AltFunc="ANI25" Point="I/O" /&gt;
+          &lt;P120 Name="P120/ANI25/TI07/TO07/TRDIOD0/SO01/INTP4" DIN="true" Nch="true" Pullup="true" AltFunc="P120" Point="I/O" /&gt;
           &lt;P121 Name="P121/X1" AltFunc="" Point="I" /&gt;
           &lt;P122 Name="P122/X2/EXCLK" AltFunc="" Point="I" /&gt;
           &lt;P123 Name="P123/XT1" AltFunc="" Point="I" /&gt;
           &lt;P124 Name="P124/XT2/EXCLKS" AltFunc="" Point="I" /&gt;
-          &lt;P125 Name="P125/ANI24/TI03/TO03/TRDIOB0/_SSI01/INTP1/SNZOUT1" DIN="true" TTL="true" PITHL="true" Pullup="true" AltFunc="ANI24" Point="I/O" /&gt;
+          &lt;P125 Name="P125/ANI24/TI03/TO03/TRDIOB0/_SSI01/INTP1/SNZOUT1" DIN="true" TTL="true" PITHL="true" Pullup="true" AltFunc="P125" Point="I/O" /&gt;
-          &lt;P126 Name="P126/TI01/TO01" Pullup="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P126 Name="P126/TI01/TO01" Pullup="true" AltFunc="P126" Point="I/O" /&gt;
-          &lt;P127 Name="P127/TI03/TO03" Pullup="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P127 Name="P127/TI03/TO03" Pullup="true" AltFunc="P127" Point="I/O" /&gt;
         &lt;/Port12&gt;
         &lt;Port13 Chip="RL78F14_48pin,RL78F14_64pin,RL78F14_80pin,RL78F14_100pin"&gt;
           &lt;P130 Name="P130/RESOUT" AltFunc="P130" Point="O" /&gt;
@@ -604,13 +584,13 @@
           &lt;P140 Name="P140/PCLBUZ0" AltFunc="" Point="I/O" /&gt;
         &lt;/Port14&gt;
         &lt;Port15 Chip="RL78F14_100pin" Pullup="true"&gt;
-          &lt;P150 Name="P150/_SSI11" PITHL="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P150 Name="P150/_SSI11" PITHL="true" AltFunc="P150" Point="I/O" /&gt;
-          &lt;P151 Name="P151/SO11" AltFunc="" Point="I/O" /&gt;
+          &lt;P151 Name="P151/SO11" AltFunc="P151" Point="I/O" /&gt;
-          &lt;P152 Name="P152/SI11/SDA11" PITHL="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P152 Name="P152/SI11/SDA11" PITHL="true" AltFunc="P152" Point="I/O" /&gt;
-          &lt;P153 Name="P153/_SCK11/SCL11" PITHL="true" AltFunc="" Point="I/O" /&gt;
+          &lt;P153 Name="P153/_SCK11/SCL11" PITHL="true" AltFunc="P153" Point="I/O" /&gt;
-          &lt;P154 Name="P154/SNZOUT7" AltFunc="" Point="I/O" /&gt;
+          &lt;P154 Name="P154/SNZOUT7" AltFunc="P154" Point="I/O" /&gt;
-          &lt;P155 Name="P155/SNZOUT6" AltFunc="" Point="I/O" /&gt;
+          &lt;P155 Name="P155/SNZOUT6" AltFunc="P155" Point="I/O" /&gt;
-          &lt;P156 Name="P156/SNZOUT5" AltFunc="" Point="I/O" /&gt;
+          &lt;P156 Name="P156/SNZOUT5" AltFunc="P156" Point="I/O" /&gt;
           &lt;P157 Name="P157/SNZOUT4" AltFunc="" Point="I/O" /&gt;
         &lt;/Port15&gt;
       &lt;/PORT&gt;
@@ -961,7 +941,7 @@
         &lt;/IICA0&gt;
       &lt;/Serial&gt;
       &lt;ADC&gt;
-        &lt;INTAD InUse="1" ISR="r_adc_interrupt" IsDMATrigger="true" /&gt;
+        &lt;INTAD InUse="0" ISR="r_adc_interrupt" IsDMATrigger="true" /&gt;
       &lt;/ADC&gt;
       &lt;TAU&gt;
         &lt;TAU0&gt;
@@ -1415,14 +1395,14 @@
         &lt;r_cg_serial.h UserName="r_cg_serial.h" LibName=".h" InUse="1" /&gt;
       &lt;/Serial&gt;
       &lt;ADC&gt;
-        &lt;r_cg_adc.c UserName="r_cg_adc.c" LibName=".c" InUse="1"&gt;
+        &lt;r_cg_adc.c UserName="r_cg_adc.c" LibName=".c" InUse="0"&gt;
           &lt;Type R_ADC_Create="void R_ADC_Create(void)" R_ADC_Start="void R_ADC_Start(void)" R_ADC_Stop="void R_ADC_Stop(void)" R_ADC_Set_OperationOn="void R_ADC_Set_OperationOn(void)" R_ADC_Set_OperationOff="void R_ADC_Set_OperationOff(void)" R_ADC_Get_Result="void R_ADC_Get_Result(uint16_t * const buffer)" R_ADC_Get_Result_8bit="void R_ADC_Get_Result_8bit(uint8_t * const buffer)" R_ADC_Set_ADChannel="MD_STATUS R_ADC_Set_ADChannel(ad_channel_t channel)" R_ADC_Set_SnoozeOn="void R_ADC_Set_SnoozeOn(void)" R_ADC_Set_SnoozeOff="void R_ADC_Set_SnoozeOff(void)" R_ADC_Set_TestChannel="MD_STATUS R_ADC_Set_TestChannel(test_channel_t channel)" R_ADC_Set_PowerOff="void R_ADC_Set_PowerOff(void)" /&gt;
-          &lt;R_ADC_Create UserName="R_ADC_Create" LibName="R_ADC_Create" InUse="1" Init="1" InitMode="" /&gt;
+          &lt;R_ADC_Create UserName="R_ADC_Create" LibName="R_ADC_Create" InUse="0" Init="1" InitMode="" /&gt;
-          &lt;R_ADC_Start UserName="R_ADC_Start" LibName="R_ADC_Start" InUse="1" /&gt;
+          &lt;R_ADC_Start UserName="R_ADC_Start" LibName="R_ADC_Start" InUse="0" /&gt;
-          &lt;R_ADC_Stop UserName="R_ADC_Stop" LibName="R_ADC_Stop" InUse="1" /&gt;
+          &lt;R_ADC_Stop UserName="R_ADC_Stop" LibName="R_ADC_Stop" InUse="0" /&gt;
-          &lt;R_ADC_Set_OperationOn UserName="R_ADC_Set_OperationOn" LibName="R_ADC_Set_OperationOn" InUse="1" /&gt;
+          &lt;R_ADC_Set_OperationOn UserName="R_ADC_Set_OperationOn" LibName="R_ADC_Set_OperationOn" InUse="0" /&gt;
-          &lt;R_ADC_Set_OperationOff UserName="R_ADC_Set_OperationOff" LibName="R_ADC_Set_OperationOff" InUse="1" /&gt;
+          &lt;R_ADC_Set_OperationOff UserName="R_ADC_Set_OperationOff" LibName="R_ADC_Set_OperationOff" InUse="0" /&gt;
-          &lt;R_ADC_Get_Result UserName="R_ADC_Get_Result" LibName="R_ADC_Get_Result" InUse="1" /&gt;
+          &lt;R_ADC_Get_Result UserName="R_ADC_Get_Result" LibName="R_ADC_Get_Result" InUse="0" /&gt;
           &lt;R_ADC_Get_Result_8bit UserName="R_ADC_Get_Result_8bit" LibName="R_ADC_Get_Result_8bit" InUse="0" /&gt;
           &lt;R_ADC_Set_ADChannel UserName="R_ADC_Set_ADChannel" LibName="R_ADC_Set_ADChannel" InUse="0" /&gt;
           &lt;R_ADC_Set_SnoozeOn UserName="R_ADC_Set_SnoozeOn" LibName="R_ADC_Set_SnoozeOn" InUse="0" /&gt;
@@ -1430,12 +1410,12 @@
           &lt;R_ADC_Set_TestChannel UserName="R_ADC_Set_TestChannel" LibName="R_ADC_Set_TestChannel" InUse="0" /&gt;
           &lt;R_ADC_Set_PowerOff UserName="R_ADC_Set_PowerOff" LibName="R_ADC_Set_PowerOff" InUse="0" /&gt;
         &lt;/r_cg_adc.c&gt;
-        &lt;r_cg_adc_user.c UserName="r_cg_adc_user.c" LibName="_user.c" InUse="1"&gt;
+        &lt;r_cg_adc_user.c UserName="r_cg_adc_user.c" LibName="_user.c" InUse="0"&gt;
           &lt;Type R_ADC_Create_UserInit="void R_ADC_Create_UserInit(void)" r_adc_interrupt="__interrupt static void r_adc_interrupt(void)" /&gt;
           &lt;R_ADC_Create_UserInit UserName="R_ADC_Create_UserInit" LibName="R_ADC_Create_UserInit" InUse="0" /&gt;
-          &lt;r_adc_interrupt UserName="r_adc_interrupt" INTHandle="" LibName="r_adc_interrupt" InUse="1" /&gt;
+          &lt;r_adc_interrupt UserName="r_adc_interrupt" INTHandle="" LibName="r_adc_interrupt" InUse="0" /&gt;
         &lt;/r_cg_adc_user.c&gt;
-        &lt;r_cg_adc.h UserName="r_cg_adc.h" LibName=".h" InUse="1" /&gt;
+        &lt;r_cg_adc.h UserName="r_cg_adc.h" LibName=".h" InUse="0" /&gt;
       &lt;/ADC&gt;
       &lt;TAU&gt;
         &lt;r_cg_timer.c UserName="r_cg_timer.c" LibName=".c" InUse=""&gt;
@@ -1941,8 +1921,8 @@
       &lt;/SAU1&gt;
       &lt;IICA0 Accelerate="No" Chip="RL78F14_32pin,RL78F14_48pin,RL78F14_64pin,RL78F14_80pin,RL78F14_100pin" MacroName="IICA" Channel="0" SetFlag="True" TabEnable="True" /&gt;
     &lt;/Serial&gt;
-    &lt;ADC SetFlag="True" HelpID="adc" NeedRefresh="False"&gt;
+    &lt;ADC SetFlag="False" HelpID="adc" NeedRefresh="False"&gt;
-      &lt;ADC SetFlag="True" MacroName="ADC" /&gt;
+      &lt;ADC SetFlag="False" MacroName="ADC" /&gt;
     &lt;/ADC&gt;
     &lt;TAU SetFlag="false" HelpID="timer" NeedRefresh="False"&gt;
       &lt;TAU0 Accelerate="No" MacroName="TAU" Channel="0" ChannelNum="0,1,2,3,4,5,6,7" /&gt;
@@ -2271,9 +2251,9 @@
     &lt;PORT&gt;
       &lt;PortP0&gt;
         &lt;P00&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2281,9 +2261,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P00&gt;
         &lt;P01&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2291,9 +2271,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P01&gt;
         &lt;P02&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2301,9 +2281,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P02&gt;
         &lt;P03&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2313,9 +2293,9 @@
       &lt;/PortP0&gt;
       &lt;PortP1&gt;
         &lt;P10&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2343,9 +2323,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P12&gt;
         &lt;P13&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2353,9 +2333,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P13&gt;
         &lt;P14&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2395,9 +2375,9 @@
       &lt;/PortP1&gt;
       &lt;PortP3&gt;
         &lt;P30&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2415,9 +2395,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P31&gt;
         &lt;P32&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2457,9 +2437,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P40&gt;
         &lt;P41&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2467,9 +2447,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P41&gt;
         &lt;P42&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2477,9 +2457,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P42&gt;
         &lt;P43&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2487,9 +2467,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P43&gt;
         &lt;P44&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2529,9 +2509,9 @@
       &lt;/PortP4&gt;
       &lt;PortP5&gt;
         &lt;P50&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2539,9 +2519,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P50&gt;
         &lt;P51&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2549,9 +2529,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P51&gt;
         &lt;P52&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2569,9 +2549,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P53&gt;
         &lt;P54&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2579,9 +2559,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P54&gt;
         &lt;P55&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2589,9 +2569,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P55&gt;
         &lt;P56&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2599,9 +2579,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P56&gt;
         &lt;P57&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2611,9 +2591,9 @@
       &lt;/PortP5&gt;
       &lt;PortP6&gt;
         &lt;P60&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2621,9 +2601,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P60&gt;
         &lt;P61&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2653,9 +2633,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P63&gt;
         &lt;P64&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2663,9 +2643,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P64&gt;
         &lt;P65&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2673,9 +2653,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P65&gt;
         &lt;P66&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2683,9 +2663,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P66&gt;
         &lt;P67&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2695,9 +2675,9 @@
       &lt;/PortP6&gt;
       &lt;PortP7&gt;
         &lt;P70&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2705,9 +2685,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P70&gt;
         &lt;P71&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2715,9 +2695,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P71&gt;
         &lt;P72&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2725,9 +2705,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P72&gt;
         &lt;P73&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2735,9 +2715,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P73&gt;
         &lt;P74&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2745,9 +2725,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P74&gt;
         &lt;P75&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2755,9 +2735,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P75&gt;
         &lt;P76&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2765,9 +2745,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P76&gt;
         &lt;P77&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2879,9 +2859,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P91&gt;
         &lt;P92&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2889,9 +2869,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P92&gt;
         &lt;P93&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2899,9 +2879,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P93&gt;
         &lt;P94&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2909,9 +2889,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P94&gt;
         &lt;P95&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2919,9 +2899,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P95&gt;
         &lt;P96&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2929,9 +2909,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P96&gt;
         &lt;P97&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2941,9 +2921,9 @@
       &lt;/PortP9&gt;
       &lt;PortP10&gt;
         &lt;P100&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2951,9 +2931,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P100&gt;
         &lt;P101&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2961,9 +2941,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P101&gt;
         &lt;P102&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2971,9 +2951,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P102&gt;
         &lt;P103&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2981,9 +2961,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P103&gt;
         &lt;P104&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -2991,9 +2971,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P104&gt;
         &lt;P105&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3001,9 +2981,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P105&gt;
         &lt;P106&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3011,9 +2991,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P106&gt;
         &lt;P107&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3023,9 +3003,9 @@
       &lt;/PortP10&gt;
       &lt;PortP12&gt;
         &lt;P120&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3073,9 +3053,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P124&gt;
         &lt;P125&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3083,9 +3063,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P125&gt;
         &lt;P126&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3093,9 +3073,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P126&gt;
         &lt;P127&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3139,9 +3119,9 @@
       &lt;/PortP14&gt;
       &lt;PortP15&gt;
         &lt;P150&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3149,9 +3129,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P150&gt;
         &lt;P151&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3159,9 +3139,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P151&gt;
         &lt;P152&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3169,9 +3149,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P152&gt;
         &lt;P153&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3179,9 +3159,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P153&gt;
         &lt;P154&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3189,9 +3169,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P154&gt;
         &lt;P155&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3199,9 +3179,9 @@
           &lt;setting name="PSRSEL" value="false" /&gt;
         &lt;/P155&gt;
         &lt;P156&gt;
-          &lt;setting name="MODULE_UNUSED" value="true" /&gt;
+          &lt;setting name="MODULE_UNUSED" value="false" /&gt;
           &lt;setting name="INPUT_MODE" value="false" /&gt;
-          &lt;setting name="OUTPUT_MODE" value="false" /&gt;
+          &lt;setting name="OUTPUT_MODE" value="true" /&gt;
           &lt;setting name="PULLUP_ON" value="false" /&gt;
           &lt;setting name="NCH_ON" value="false" /&gt;
           &lt;setting name="OUTPUT_1" value="false" /&gt;
@@ -3231,8 +3211,8 @@
       &lt;setting name="WDT_INTERRUPT_PRIORITY" value="3" /&gt;
     &lt;/WDT&gt;
     &lt;ADC&gt;
-      &lt;setting name="ADC_USED" value="true" /&gt;
+      &lt;setting name="ADC_USED" value="false" /&gt;
-      &lt;setting name="ADC_UNUSED" value="false" /&gt;
+      &lt;setting name="ADC_UNUSED" value="true" /&gt;
       &lt;setting name="ADC_COMPARATOR_ENABLE" value="false" /&gt;
       &lt;setting name="ADC_COMPARATOR_DISABLE" value="true" /&gt;
       &lt;setting name="ADC_RESOLUTION_10BIT" value="true" /&gt;

owi.c

@@ -313,7 +313,7 @@ uint8_t OWI_ReadBit(void)
     }
 
     if (timeout <= 0) {
-        uart_send_string("OWI Timeout\r\n");
+        HOST_PRINT("OWI Timeout\r\n");
         return 0xFF;
     }
 
@@ -389,7 +389,7 @@ void OWI_T_ReadBytesAndPrint(int length)
     }
     sprintf(uart_buf, "%02X ", buf[0]);
     strcpy(tmp_buf, uart_buf);
-    uart_send_string(tmp_buf);
+    HOST_PRINT(tmp_buf);
     
     for (i = 1; i < length; i+=2) {
         
@@ -398,7 +398,7 @@ void OWI_T_ReadBytesAndPrint(int length)
 	delay(10000);
         sprintf(uart_buf, "%02X%02X ", va0, va1);
 	strcpy(tmp_buf, uart_buf);
-        uart_send_string(tmp_buf);
+        HOST_PRINT(tmp_buf);
 	delay(10000);
     }    
 }
@@ -474,19 +474,6 @@ void OWI_A_CommandMode(const uint8_t *tx_data, uint8_t tx_len, uint8_t id)
     float v;
     uint8_t read_address = 0x51;
 
-    // ===== 1) ADC 읽기 =====
-    ADC_ReadAndSend_UART();
-    if (g_adc_len != ADC_NUM_CH) {
-        uart_send_string("Err:adc_count\r\n");
-        return;
-    }
-    for (j = 0; j < g_adc_len; j++) {
-        v = g_adc_bytes[j];
-        n += sprintf(&line[n], "%.2f", v);
-        if (j + 1 < g_adc_len) line[n++] = ',';
-    }
-    line[n++] = ',';
-
     // ===== 2) OWI Power On =====
     OWI_EnablePower();
     delay_us(7000);  // Power-on delay
@@ -567,7 +554,7 @@ void OWI_A_CommandMode(const uint8_t *tx_data, uint8_t tx_len, uint8_t id)
     line[n++] = '\r';
     line[n++] = '\n';
     line[n] = '\0';
-    uart_send_string(line);
+    HOST_PRINT(line);
 
     delay(10000);
     OWI_DisablePower();
@@ -674,7 +661,7 @@ void OWI_Diagnostic(uint8_t id)
     line[n++] = '\r';
     line[n++] = '\n';
     line[n] = '\0';
-    uart_send_string(line);
+    HOST_PRINT(line);
 
     delay(10000);
 }
@@ -698,7 +685,7 @@ void OWI_disable()
 
 {
 	OWI_DisablePower();
-	uart_send_string("51\r\n");
+	HOST_PRINT("51\r\n");
 }
 
 
@@ -753,7 +740,7 @@ void OWI_T_CommandMode(const uint8_t *tx_data, uint8_t tx_len, uint8_t id)
         OWI_WriteByte(tx_data[i]);  // 명령 전송
     }
     OWI_Stop();                     // 쓰기 종료
-    uart_send_string("51\r\n");
+    HOST_PRINT("51\r\n");
     
 
 
@@ -804,7 +791,7 @@ void OWI_CommandMode(const uint8_t *tx_data, uint8_t tx_len, uint8_t id)
     }
     OWI_Stop();                     // 쓰기 종료
 
-    uart_send_string("51\r\n");
+    HOST_PRINT("51\r\n");
 }
 
 
@@ -856,7 +843,7 @@ void OWI_ReadBytesAndPrint(int length, uint8_t id)
     }
     sprintf(uart_buf, "%02X ", buf[0]);
     strcpy(tmp_buf, uart_buf);
-    uart_send_string(tmp_buf);
+    HOST_PRINT(tmp_buf);
     
     for (i = 1; i < length; i += 2) {
 
@@ -868,18 +855,18 @@ void OWI_ReadBytesAndPrint(int length, uint8_t id)
             delay(10000);
             sprintf(uart_buf, "%02X%02X ", va0, va1);
             strcpy(tmp_buf, uart_buf);
-            uart_send_string(tmp_buf);
+            HOST_PRINT(tmp_buf);
             delay(10000);
         } else {
             // 마지막 1바이트가 남은 경우 단독 출력
             delay(10000);
             sprintf(uart_buf, "%02X", va0);
             strcpy(tmp_buf, uart_buf);
-            uart_send_string(tmp_buf);
+            HOST_PRINT(tmp_buf);
             delay(10000);
         }
     }
-     uart_send_string("\r\n");
+     HOST_PRINT("\r\n");
 }
 
 

r_cg_cgc.c

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements device driver for CGC module.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 /***********************************************************************************************************************

r_cg_cgc.h

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements device driver for CGC module.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 #ifndef CGC_H

r_cg_cgc_user.c

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements device driver for CGC module.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 /***********************************************************************************************************************

r_cg_macrodriver.h

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements general head file.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 #ifndef STATUS_H

r_cg_port.c

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements device driver for PORT module.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 /***********************************************************************************************************************
@@ -55,8 +55,49 @@ Global variables and functions
 ***********************************************************************************************************************/
 void R_PORT_Create(void)
 {
+    P0 = _00_Pn0_OUTPUT_0 | _00_Pn1_OUTPUT_0 | _00_Pn2_OUTPUT_0 | _00_Pn3_OUTPUT_0;
+    P1 = _00_Pn0_OUTPUT_0 | _00_Pn3_OUTPUT_0 | _00_Pn4_OUTPUT_0;
+    P3 = _00_Pn0_OUTPUT_0 | _00_Pn2_OUTPUT_0;
+    P4 = _00_Pn1_OUTPUT_0 | _00_Pn2_OUTPUT_0 | _00_Pn3_OUTPUT_0 | _00_Pn4_OUTPUT_0;
+    P5 = _00_Pn0_OUTPUT_0 | _00_Pn1_OUTPUT_0 | _00_Pn2_OUTPUT_0 | _00_Pn4_OUTPUT_0 | _00_Pn5_OUTPUT_0 |
+         _00_Pn6_OUTPUT_0 | _00_Pn7_OUTPUT_0;
+    P6 = _00_Pn0_OUTPUT_0 | _00_Pn1_OUTPUT_0 | _00_Pn4_OUTPUT_0 | _00_Pn5_OUTPUT_0 | _00_Pn6_OUTPUT_0 |
+         _00_Pn7_OUTPUT_0;
+    P7 = _00_Pn0_OUTPUT_0 | _00_Pn1_OUTPUT_0 | _00_Pn2_OUTPUT_0 | _00_Pn3_OUTPUT_0 | _00_Pn4_OUTPUT_0 |
+         _00_Pn5_OUTPUT_0 | _00_Pn6_OUTPUT_0 | _00_Pn7_OUTPUT_0;
+    P9 = _00_Pn2_OUTPUT_0 | _00_Pn3_OUTPUT_0 | _00_Pn4_OUTPUT_0 | _00_Pn5_OUTPUT_0 | _00_Pn6_OUTPUT_0 |
+         _00_Pn7_OUTPUT_0;
+    P10 = _00_Pn0_OUTPUT_0 | _00_Pn1_OUTPUT_0 | _00_Pn2_OUTPUT_0 | _00_Pn3_OUTPUT_0 | _00_Pn4_OUTPUT_0 |
+          _00_Pn5_OUTPUT_0 | _00_Pn6_OUTPUT_0 | _00_Pn7_OUTPUT_0;
+    P12 = _00_Pn0_OUTPUT_0 | _00_Pn5_OUTPUT_0 | _00_Pn6_OUTPUT_0 | _00_Pn7_OUTPUT_0;
     P13 = _00_Pn0_OUTPUT_0;
+    P15 = _00_Pn0_OUTPUT_0 | _00_Pn1_OUTPUT_0 | _00_Pn2_OUTPUT_0 | _00_Pn3_OUTPUT_0 | _00_Pn4_OUTPUT_0 |
+          _00_Pn5_OUTPUT_0 | _00_Pn6_OUTPUT_0;
     POM6 = _04_POMn2_NCH_ON | _08_POMn3_NCH_ON;
+    PMC7 = _00_PMCn0_DI_ON | _00_PMCn1_DI_ON | _00_PMCn2_DI_ON | _00_PMCn3_DI_ON | _00_PMCn4_DI_ON | _E0_PMC7_DEFAULT;
+    PMC12 = _00_PMCn0_DI_ON | _00_PMCn5_DI_ON | _DE_PMC12_DEFAULT;
+    PSRSEL = _00_PSR14_NORMAL | _00_PSR120_NORMAL | _00_PSR30_NORMAL | _00_PSR10_NORMAL;
+    ADPC = _0D_ADPC_DI_ON;
+    PM0 = _00_PMn0_MODE_OUTPUT | _00_PMn1_MODE_OUTPUT | _00_PMn2_MODE_OUTPUT | _00_PMn3_MODE_OUTPUT | _F0_PM0_DEFAULT;
+    PM1 = _00_PMn0_MODE_OUTPUT | _02_PMn1_NOT_USE | _04_PMn2_NOT_USE | _00_PMn3_MODE_OUTPUT | _00_PMn4_MODE_OUTPUT |
+          _20_PMn5_NOT_USE | _40_PMn6_NOT_USE | _80_PMn7_NOT_USE;
+    PM3 = _00_PMn0_MODE_OUTPUT | _02_PMn1_NOT_USE | _00_PMn2_MODE_OUTPUT | _08_PMn3_NOT_USE | _10_PMn4_NOT_USE |
+          _E0_PM3_DEFAULT;
+    PM4 = _01_PMn0_NOT_USE | _00_PMn1_MODE_OUTPUT | _00_PMn2_MODE_OUTPUT | _00_PMn3_MODE_OUTPUT | _00_PMn4_MODE_OUTPUT |
+          _20_PMn5_NOT_USE | _40_PMn6_NOT_USE | _80_PMn7_NOT_USE;
+    PM5 = _00_PMn0_MODE_OUTPUT | _00_PMn1_MODE_OUTPUT | _00_PMn2_MODE_OUTPUT | _08_PMn3_NOT_USE | _00_PMn4_MODE_OUTPUT |
+          _00_PMn5_MODE_OUTPUT | _00_PMn6_MODE_OUTPUT | _00_PMn7_MODE_OUTPUT;
+    PM6 = _00_PMn0_MODE_OUTPUT | _00_PMn1_MODE_OUTPUT | _04_PMn2_NOT_USE | _08_PMn3_NOT_USE | _00_PMn4_MODE_OUTPUT |
+          _00_PMn5_MODE_OUTPUT | _00_PMn6_MODE_OUTPUT | _00_PMn7_MODE_OUTPUT;
+    PM7 = _00_PMn0_MODE_OUTPUT | _00_PMn1_MODE_OUTPUT | _00_PMn2_MODE_OUTPUT | _00_PMn3_MODE_OUTPUT |
+          _00_PMn4_MODE_OUTPUT | _00_PMn5_MODE_OUTPUT | _00_PMn6_MODE_OUTPUT | _00_PMn7_MODE_OUTPUT;
+    PM9 = _01_PMn0_NOT_USE | _02_PMn1_NOT_USE | _00_PMn2_MODE_OUTPUT | _00_PMn3_MODE_OUTPUT | _00_PMn4_MODE_OUTPUT |
+          _00_PMn5_MODE_OUTPUT | _00_PMn6_MODE_OUTPUT | _00_PMn7_MODE_OUTPUT;
+    PM10 = _00_PMn0_MODE_OUTPUT | _00_PMn1_MODE_OUTPUT | _00_PMn2_MODE_OUTPUT | _00_PMn3_MODE_OUTPUT |
+           _00_PMn4_MODE_OUTPUT | _00_PMn5_MODE_OUTPUT | _00_PMn6_MODE_OUTPUT | _00_PMn7_MODE_OUTPUT;
+    PM12 = _00_PMn0_MODE_OUTPUT | _00_PMn5_MODE_OUTPUT | _00_PMn6_MODE_OUTPUT | _00_PMn7_MODE_OUTPUT | _1E_PM12_DEFAULT;
+    PM15 = _00_PMn0_MODE_OUTPUT | _00_PMn1_MODE_OUTPUT | _00_PMn2_MODE_OUTPUT | _00_PMn3_MODE_OUTPUT |
+           _00_PMn4_MODE_OUTPUT | _00_PMn5_MODE_OUTPUT | _00_PMn6_MODE_OUTPUT | _80_PMn7_NOT_USE;
 }
 
 /* Start user code for adding. Do not edit comment generated here */

r_cg_port.h

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements device driver for PORT module.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 #ifndef PORT_H

r_cg_port_user.c

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements device driver for PORT module.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 /***********************************************************************************************************************

r_cg_serial.c

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements device driver for Serial module.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 /***********************************************************************************************************************

r_cg_serial.h

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements device driver for Serial module.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 #ifndef SERIAL_H

r_cg_serial_user.c

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements device driver for Serial module.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 /***********************************************************************************************************************
@@ -68,6 +68,13 @@ extern volatile uint16_t  g_iica0_rx_len;              /* iica0 receive data cou
 extern volatile uint8_t * gp_iica0_tx_address;         /* iica0 send buffer address */
 extern volatile uint16_t  g_iica0_tx_cnt;              /* iica0 send data count */
 /* Start user code for global. Do not edit comment generated here */
+extern volatile uint8_t  rs485_rx_done;
+extern volatile uint8_t  rs485_rx_index;
+extern volatile uint8_t  rs485_rx_buffer[UART_RX_BUF_SIZE];
+extern volatile uint16_t rs485_rx_length;
+extern volatile uint8_t g_rs485_bridge_active;
+extern volatile uint8_t g_rs485_bridge_done;
+void RS485_Bridge_Push(uint8_t b);
 /* End user code. Do not edit comment generated here */
 
 /***********************************************************************************************************************
@@ -137,6 +144,52 @@ static void __near r_uart0_interrupt_send(void)
 static void r_uart0_callback_receiveend(void)
 {
     /* Start user code. Do not edit comment generated here */
+    uint8_t c;
+
+    if (g_rs485_bridge_active) {
+        // ?????? ?? buffer[0]? 1??? ????? ?????? 0?? ???
+        c = rs485_rx_buffer[0];
+
+        RS485_Bridge_Push(c);
+
+        // "? ? ??" ?? ??
+        if (c == '\n') {
+            g_rs485_bridge_done = 1;
+        }
+
+        // ?? 1??? ?? ??
+        R_UART0_Receive((uint8_t*)&rs485_rx_buffer[0], 1);
+        return;
+    }
+    
+    c = rs485_rx_buffer[rs485_rx_index];
+    
+    // Bridge mode: stream RS485 bytes to PC as they arrive
+    if (g_rs485_bridge_active) {
+        RS485_Bridge_Push(c);
+        if (c == '\n') {
+            g_rs485_bridge_done = 1;
+        }
+
+        // ?? 1??? ?? ?? (index 0 ???)
+        rs485_rx_index = 0;
+        rs485_rx_length = 0;
+        R_UART0_Receive((uint8_t*)&rs485_rx_buffer[0], 1);
+        return;
+    }
+
+    if (rs485_rx_index < (UART_RX_BUF_SIZE - 1)) {
+        rs485_rx_index++;
+        rs485_rx_length = rs485_rx_index;
+    }
+
+    if (c == '\n' || rs485_rx_index >= (UART_RX_BUF_SIZE - 1)) {
+        rs485_rx_done = 1;
+        // ?? Receive? main loop?? ?? ??? ??,
+        // ??? ?? ??? ?(?? ??)
+    } else {
+        R_UART0_Receive((uint8_t*)&rs485_rx_buffer[rs485_rx_index], 1);
+    }
     /* End user code. Do not edit comment generated here */
 }
 

r_cg_userdefine.h

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file includes user definition.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 #ifndef _USER_DEF_H

r_cg_wdt.c

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements device driver for WDT module.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 /***********************************************************************************************************************

r_cg_wdt.h

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements device driver for WDT module.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 #ifndef WDT_H

r_cg_wdt_user.c

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements device driver for WDT module.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 /***********************************************************************************************************************

r_main.c

@@ -2,15 +2,15 @@
 * DISCLAIMER
 * This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products.
 * No other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all
-* applicable laws, including copyright laws.
+* applicable laws, including copyright laws. 
 * THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED
 * OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NON-INFRINGEMENT.  ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY
 * LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE FOR ANY DIRECT,
 * INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR
 * ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-* Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability
+* Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability 
-* of this software. By using this software, you agree to the additional terms and conditions found by accessing the
+* of this software. By using this software, you agree to the additional terms and conditions found by accessing the 
 * following link:
 * http://www.renesas.com/disclaimer
 *
@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements main function.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 /***********************************************************************************************************************
@@ -33,11 +33,9 @@ Includes
 #include "r_cg_cgc.h"
 #include "r_cg_port.h"
 #include "r_cg_serial.h"
-#include "r_cg_adc.h"
 #include "r_cg_wdt.h"
 /* Start user code for include. Do not edit comment generated here */
 #include "common.h"
-#include "anaout.h"
 #include "dipSwitch.h"
 #include "gatectrl.h"
 #include <string.h>
@@ -46,14 +44,22 @@ Includes
 #include <r_cg_port.h>
 
 #define CMD_MAX 529
+#define RS485_BRIDGE_FIFO_SZ 256
 
 volatile uint8_t  uart_rx_done = 0;
 volatile uint8_t  uart_rx_index = 0;
 volatile uint8_t  uart_rx_buffer[UART_RX_BUF_SIZE] = {0};
 volatile uint16_t uart_rx_length = 0;
 
+volatile uint8_t  rs485_rx_done = 0;
+volatile uint8_t  rs485_rx_index = 0;
+volatile uint8_t  rs485_rx_buffer[UART_RX_BUF_SIZE] = {0};
+volatile uint16_t rs485_rx_length = 0;
+volatile uint8_t g_rs485_bridge_active = 0;
+volatile uint8_t g_rs485_bridge_done   = 0;
+
 // (1~32)
-static uint8_t g_fixed_addr = 1;
+uint8_t g_fixed_addr = 1;
 /* End user code. Do not edit comment generated here */
 #include "r_cg_userdefine.h"
 
@@ -62,6 +68,52 @@ Pragma directive
 ***********************************************************************************************************************/
 /* Start user code for pragma. Do not edit comment generated here */
 
+static volatile uint8_t s_rb_fifo[RS485_BRIDGE_FIFO_SZ];
+static volatile uint8_t s_rb_head = 0;
+static volatile uint8_t s_rb_tail = 0;
+
+void RS485_Bridge_Push(uint8_t b)
+{
+    uint8_t next = (uint8_t)(s_rb_head + 1);
+    if (next >= RS485_BRIDGE_FIFO_SZ) next = 0;
+
+    // FIFO full이면 tail을 당겨서 “최신 데이터 우선”으로 유지(드랍 정책)
+    if (next == s_rb_tail) {
+        uint8_t t = (uint8_t)(s_rb_tail + 1);
+        if (t >= RS485_BRIDGE_FIFO_SZ) t = 0;
+        s_rb_tail = t;
+    }
+
+    s_rb_fifo[s_rb_head] = b;
+    s_rb_head = next;
+}
+
+static void RS485_Bridge_ResetFifo(void)
+{
+    s_rb_head = 0;
+    s_rb_tail = 0;
+}
+
+static void RS485_Bridge_DrainToPC(void)
+{
+    // UART1이 전송 중이면(드라이버 카운트) 새 전송 시작하지 않음
+    extern volatile uint16_t g_uart1_tx_count;
+    static char out[2];
+
+    while (s_rb_tail != s_rb_head) {
+        if (g_uart1_tx_count != 0U) break;
+
+        out[0] = (char)s_rb_fifo[s_rb_tail];
+        out[1] = '\0';
+
+        uart1_send_string(out); // PC(UART1)로 1바이트 전송 시작
+
+        s_rb_tail++;
+        if (s_rb_tail >= RS485_BRIDGE_FIFO_SZ) s_rb_tail = 0;
+    }
+}
+
+
 static unsigned char hex2byte(char h, char l)
 {
     unsigned char hi, lo;
@@ -72,23 +124,176 @@ static unsigned char hex2byte(char h, char l)
     return (unsigned char)((hi << 4) | lo);
 }
 
-static int parse_x_prefix(const char *s, int len, uint8_t *addr, uint8_t *ch, int *payload_pos)
+typedef enum {
+    PREFIX_NONE = 0,
+    PREFIX_CAL,
+    PREFIX_EOL
+} PrefixMode;
+
+static PrefixMode s_prefix_mode = PREFIX_NONE;
+
+static int parse_x_prefix(const char *s, int len,
+                          uint8_t *addr, uint8_t *ch,
+                          char *mode, uint8_t *hash_on, uint8_t *anaout_on, uint8_t *check_on, int *payload_pos)
 {
-    if (len < 9) return 0;
+    *hash_on = 0;
-    if (toupper((unsigned char)s[0]) != 'X') return 0;
+    *anaout_on = 0;
+    *check_on = 1;
+	
+    if (len < 8) return 0;
+
+    if (!(s[0] == 'x' || s[0] == 'X')) return 0;
 
     if (!isdigit((unsigned char)s[1]) || !isdigit((unsigned char)s[2])) return -1;
-    if (toupper((unsigned char)s[3]) != 'C') return -1;
+
+    if      (s[3] == 'c' || s[3] == 'C') *mode = 'C';
+    else if (s[3] == 'e' || s[3] == 'E') *mode = 'E';
+    else return -1;
+
     if (s[4] != '_') return -1;
     if (!isdigit((unsigned char)s[5]) || !isdigit((unsigned char)s[6]) || !isdigit((unsigned char)s[7])) return -1;
-    if (s[8] != ':') return -1;
 
     *addr = (uint8_t)((s[1] - '0') * 10 + (s[2] - '0'));
     *ch   = (uint8_t)((s[5] - '0') * 100 + (s[6] - '0') * 10 + (s[7] - '0'));
-    *payload_pos = 9;
+
+    // prefix만 온 케이스: x01e_001 / x01c_001
+    if (len == 8) {
+        *payload_pos = len;
+        return 1;
+    }
+
+    // payload 있는 케이스: x01c_001:...
+    if (s[8] == ':') {
+        *payload_pos = 9;
+        return 1;
+    }
+    
+    // 3) flags: x01c_001011  or x01c_001011:...
+    if (len >= 11 &&
+        (s[8]  == '0' || s[8]  == '1') &&
+        (s[9]  == '0' || s[9]  == '1') &&
+        (s[10] == '0' || s[10] == '1'))
+    {
+        *hash_on   = (uint8_t)(s[8]  - '0');
+        *anaout_on = (uint8_t)(s[9]  - '0');
+        *check_on  = (uint8_t)(s[10] - '0');
+
+        // flags only
+        if (len == 11) {
+            *payload_pos = 11;
+            return 1;
+        }
+
+        // flags + payload
+        if (len >= 12 && s[11] == ':') {
+            *payload_pos = 12;
+            return 1;
+        }
+
+        return -1;
+    }
+
+    return -1;
+}
+
+typedef enum {
+    CMD_SRC_PC = 0,
+    CMD_SRC_RS485 = 1
+} CmdSource;
+
+static void OUT_PRINT(CmdSource src, const char *s)
+{
+    if (src == CMD_SRC_PC) PC_PRINT(s);
+    else                  RS485_PRINT(s);
+}
+
+// xNNv (예: x00v, x31v) 판별
+static int parse_x_v_cmd(const char *s, int len, uint8_t *addr)
+{
+    if (len != 4) return 0;  // "x" + 2digit + "v" = 4
+    if (!(s[0] == 'x' || s[0] == 'X')) return 0;
+    if (!isdigit((unsigned char)s[1]) || !isdigit((unsigned char)s[2])) return 0;
+    if (!(s[3] == 'v' || s[3] == 'V')) return 0;
+
+    *addr = (uint8_t)((s[1] - '0') * 10 + (s[2] - '0'));
     return 1;
 }
 
+static void send_v_response(CmdSource src, uint8_t addr)
+{
+    char resp[8];
+    // "V00\r\n\0"
+    resp[0] = 'V';
+    resp[1] = (char)('0' + (addr / 10));
+    resp[2] = (char)('0' + (addr % 10));
+    resp[3] = '\r';
+    resp[4] = '\n';
+    resp[5] = '\0';
+    OUT_PRINT(src, resp);
+}
+
+// 보드1이 addr(1~31)을 RS485로 조회하고, 응답이 오면 스트리밍으로 PC에 전달
+static void scan_one_addr_rs485(uint8_t addr)
+{
+    char cmdline[8];
+    unsigned long guard;
+
+    // "xNNv\r\n"
+    cmdline[0] = 'x';
+    cmdline[1] = (char)('0' + (addr / 10));
+    cmdline[2] = (char)('0' + (addr % 10));
+    cmdline[3] = 'v';
+    cmdline[4] = '\r';
+    cmdline[5] = '\n';
+    cmdline[6] = '\0';
+
+    // 브릿지 준비
+    g_rs485_bridge_active = 1;
+    g_rs485_bridge_done   = 0;
+    RS485_Bridge_ResetFifo();
+
+    R_UART0_Receive((uint8_t*)&rs485_rx_buffer[0], 1);
+
+    // 조회 커맨드 송신
+    RS485_PRINT(cmdline);
+
+    // 응답 들어오면(done)까지 드레인
+    guard = 0;
+    while (!g_rs485_bridge_done && guard++ < 300000UL) {
+        RS485_Bridge_DrainToPC();
+    }
+    // 남은 FIFO 마저
+    RS485_Bridge_DrainToPC();
+
+    // 브릿지 종료
+    g_rs485_bridge_active = 0;
+
+    // 다음 RS485 RX 재시작(기존 라인처리도 계속 돌릴 거면 유지)
+    rs485_rx_done   = 0;
+    rs485_rx_index  = 0;
+    rs485_rx_length = 0;
+    R_UART0_Receive((uint8_t*)&rs485_rx_buffer[0], 1);
+}
+
+static int build_line_from_rx(const volatile uint8_t *rx_buf, int rx_len,
+                              char *out, int out_sz)
+{
+    int i, idx = 0;
+
+    if (rx_len < 0) rx_len = 0;
+    if (rx_len > out_sz - 1) rx_len = out_sz - 1;
+
+    for (i = 0; i < rx_len && idx < out_sz - 1; i++) {
+        char c = (char)rx_buf[i];
+        if (c == '\r') continue;
+        if (c == '\n') break;
+        out[idx++] = c;
+    }
+    out[idx] = '\0';
+    return idx;
+}
+
+
 typedef enum {
     PROTOCOL_I2CT,
     PROTOCOL_OWIT,
@@ -96,11 +301,6 @@ typedef enum {
     PROTOCOL_I2CR,
     PROTOCOL_OWIW,
     PROTOCOL_OWIR,
-    PROTOCOL_I2CA,
-    PROTOCOL_OWIA,
-    PROTOCOL_OWID,
-    PROTOCOL_OWIC,
-    PROTOCOL_I2CC,
     PROTOCOL_UNKNOWN
 } ProtocolType;
 
@@ -115,7 +315,7 @@ static ProtocolType detect_protocol(char header1, char header2)
 
 static void cmd_unknown(const unsigned char *d, unsigned int len)
 {
-    uart1_send_string("Unknown cmd\r\n");
+    HOST_PRINT("Unknown cmd\r\n");
     delay(100000);
 }
 
@@ -129,172 +329,335 @@ static void process_cmd(ProtocolType protocol, uint8_t id,
         case PROTOCOL_I2CR: I2C_Command_Mode_Send((uint8_t)len, id); break;
         case PROTOCOL_OWIW: OWI_CommandMode(data, (uint8_t)len, id); break;
         case PROTOCOL_OWIR: OWI_ReadBytesAndPrint(len, id); break;
-        case PROTOCOL_I2CA: I2C_A_Command_Mode_receiveData(data, (uint8_t)len, id); break;
-        case PROTOCOL_OWIA: OWI_A_CommandMode(data, (uint8_t)len, id); break;
-        case PROTOCOL_OWID: OWI_disable(); break;
-        case PROTOCOL_OWIC: OWI_Diagnostic(id); break;
-        case PROTOCOL_I2CC: I2C_Diagnostic(id); break;
         default:            cmd_unknown(data, len); break;
     }
 }
 
-void handle_uart_command_line(void)
+static void process_cmd_by_prefix(PrefixMode pm,
+                                  ProtocolType protocol, uint8_t id,
+                                  const unsigned char *data, unsigned int len)
+{
+    if (pm == PREFIX_EOL) {
+        // TODO: EOL 전용 처리 필요 시 여기에
+        process_cmd(protocol, id, data, len);
+    } else {
+        // CAL 또는 Prefix 없음
+        process_cmd(protocol, id, data, len);
+    }
+}
+
+static void process_one_line(CmdSource src, const volatile uint8_t *rx_buf, uint16_t rx_len)
 {
     char line[UART_RX_BUF_SIZE];
 
-    while (1)
+    uint8_t v_addr = 0;
+    int is_v = 0;
+    uint8_t a = 0;
+    
+    int i;
+    int idx = 0;
+    int pos = 2;
+
+    ProtocolType proto;
+    uint8_t id;
+    unsigned int byte_len;
+    uint8_t cmd[CMD_MAX];
+    unsigned int k = 0;
+
+    char orig_line[UART_RX_BUF_SIZE];
+    int  orig_len = 0;
+
+    s_prefix_mode = PREFIX_NONE;
+
+    // 1) RX 버퍼 -> line 구성 (CR/LF 제거)
+    idx = build_line_from_rx(rx_buf, (int)rx_len, line, (int)sizeof(line));
+    if (idx <= 0) return;
+    
+    // xNNv 처리 (x-prefix 처리보다 먼저!)
     {
-        if (uart_rx_done)
+        is_v = parse_x_v_cmd(line, idx, &v_addr);
-        {
+        if (is_v) {
-            int i;
-            int idx = 0;
-            int pos = 2;
-            int rx_len;
-            ProtocolType proto;
-            uint8_t id;
-            unsigned int byte_len;
-            uint8_t cmd[CMD_MAX];
-            unsigned int k = 0;
-
-            uart_rx_done = 0;
-
-            rx_len = (int)uart_rx_length;
-            if (rx_len < 0) rx_len = 0;
-            if (rx_len > (int)UART_RX_BUF_SIZE - 1) rx_len = (int)UART_RX_BUF_SIZE - 1;
-            uart_rx_buffer[rx_len] = '\0';
-
-            for (i = 0; i < rx_len && i < (int)sizeof(line) - 1; i++) {
-                char c = (char)uart_rx_buffer[i];
-                if (c == '\r') continue;
-                if (c == '\n') break;
-                line[idx++] = c;
-            }
-            line[idx] = '\0';
 
-            {
+            if (v_addr > 31) { OUT_PRINT(src, "Err:addr_range\r\n"); return; }
-                uint8_t addr = 0;
-                uint8_t ch = 0;
-                int payload_pos = 0;
-                int r = parse_x_prefix(line, idx, &addr, &ch, &payload_pos);
-
-                if (r == -1) {
-                    uart1_send_string("Err:X_prefix\r\n");
-                    goto clear;
-                }
 
-                if (r == 1) {
+            // 보드1(ADDR0) + PC에서 x00v => 00~31 스캔
-                    if (addr < 1 || addr > 32) { uart1_send_string("Err:addr_range\r\n"); goto clear; }
+            if (g_fixed_addr == 0 && src == CMD_SRC_PC && v_addr == 0) {
-                    if (ch   < 1 || ch   > 20) { uart1_send_string("Err:ch_range\r\n"); goto clear; }
+                
 
-                    if (addr != g_fixed_addr) {
+                // 자기 자신(00)은 즉시 응답
-                        uart1_send_string("Err:addr_mismatch\r\n");
+                send_v_response(CMD_SRC_PC, 0);
-                        goto clear;
-                    }
 
-                    GateCtrl_SelectChannel(ch);
+                // 01~31 순차 조회 (존재하는 보드만 VNN이 PC로 흘러옴)
-                    
+                for (a = 1; a <= 31; a++) {
-                    {
+                    scan_one_addr_rs485(a);
-                        int rem = idx - payload_pos;
-                        if (rem <= 0) {
-                            uart1_send_string("<ACK>XC\r\n");
-                            goto clear;
-                        }
-                        for (i = 0; i < rem; i++) line[i] = line[payload_pos + i];
-                        line[rem] = '\0';
-                        idx = rem;
-                        pos = 2;
-                    }
                 }
+                return;
             }
 
-            if (idx < 7) { uart1_send_string("Err:short\r\n"); goto clear; }
+            // 그 외: 내 주소와 일치할 때만 응답
-
+            if (v_addr == g_fixed_addr) {
-            {
+                send_v_response(src, g_fixed_addr);
-                char h0 = (char)toupper((unsigned char)line[0]);
-                char h1 = (char)toupper((unsigned char)line[1]);
-                proto = detect_protocol(h0, h1);
-            }
-            if (proto == PROTOCOL_UNKNOWN) { uart1_send_string("Err:ID\r\n"); goto clear; }
-
-            if (line[pos] == 't' || line[pos] == 'T') {
-                if (proto == PROTOCOL_OWIW) proto = PROTOCOL_OWIT;
-                else if (proto == PROTOCOL_I2CW) proto = PROTOCOL_I2CT;
-                pos++;
-            }
-
-            if (line[pos] == 'a' || line[pos] == 'A') {
-                if (proto == PROTOCOL_OWIW) proto = PROTOCOL_OWIA;
-                else if (proto == PROTOCOL_I2CW) proto = PROTOCOL_I2CA;
-                pos++;
-            }
-
-            if (line[pos] == 'd' || line[pos] == 'D') {
-                if (proto == PROTOCOL_OWIW) proto = PROTOCOL_OWID;
-                pos++;
             }
+            return; // v 커맨드 처리는 여기서 종료
+        }
+    }
 
-            if (line[pos] == 'c' || line[pos] == 'C') {
-                if (proto == PROTOCOL_OWIW) proto = PROTOCOL_OWIC;
-                else if (proto == PROTOCOL_I2CW) proto = PROTOCOL_I2CC;
-                pos++;
-            }
 
-            if (line[pos] == '_' || line[pos] == ':') pos++;
+    // RS485 중계용 원본 저장
+    orig_len = idx;
+    memcpy(orig_line, line, (size_t)orig_len);
+    orig_line[orig_len] = '\0';
 
-            if (pos + 1 >= idx) { uart1_send_string("Err:id_short\r\n"); goto clear; }
+    // 2) x-prefix 처리(있으면)
-            id = hex2byte(line[pos], line[pos+1]);
+    {
-            pos += 2;
+        uint8_t addr = 0;
+        uint8_t ch = 0;
+        char mode = 0;
+        int payload_pos = 0;
+	
+	uint8_t hash_on = 0;
+        uint8_t anaout_on = 0;
+        uint8_t check_on = 1;
+
+        int r = parse_x_prefix(line, idx, &addr, &ch, &mode, &hash_on, &anaout_on, &check_on, &payload_pos);
+
+        if (r == -1) {
+            OUT_PRINT(src, "Err:X_prefix\r\n");
+            return;
+        }
 
-            if (pos + 2 >= idx ||
+        if (r == 1) {
-                !(line[pos]   >= '0' && line[pos]   <= '9') ||
+            if (addr > 31) { OUT_PRINT(src, "Err:addr_range\r\n"); return; }
-                !(line[pos+1] >= '0' && line[pos+1] <= '9') ||
+            if (ch < 1 || ch > 20) { OUT_PRINT(src, "Err:ch_range\r\n"); return; }
-                !(line[pos+2] >= '0' && line[pos+2] <= '9')) {
+
-                uart1_send_string("Err:len_dec\r\n"); goto clear;
+            // 내 주소가 아니면:
+            // - 보드1(ADDR0) + PC에서 들어온 것: RS485로 중계 + RS485응답을 PC로 전달
+            // - 그 외(슬레이브거나 RS485수신): 조용히 무시
+            if (addr != g_fixed_addr) {
+			   	    
+                // 보드1(ADDR0) + PC에서 들어온 것만 RS485 중계
+    		if (g_fixed_addr == 0 && src == CMD_SRC_PC) {
+
+        	    // 0) 브릿지 준비
+        	    g_rs485_bridge_active = 1;
+        	    g_rs485_bridge_done   = 0;
+        	    RS485_Bridge_ResetFifo();
+
+        	    // 1) RS485 RX 재시작(1바이트씩 계속 받게)
+        	    rs485_rx_done = 0;
+        	    rs485_rx_index = 0;
+        	    rs485_rx_length = 0;
+        	    R_UART0_Receive((uint8_t*)&rs485_rx_buffer[0], 1);
+
+        	    // 2) RS485로 커맨드 송신
+        	    RS485_PRINT(orig_line);
+        	    RS485_PRINT("\r\n");
+
+        	    // 3) “응답이 들어오는 동안” 드레인 하면서 대기
+        	    {
+            		unsigned long guard = 0;
+            		while (!g_rs485_bridge_done && guard++ < 600000UL) {
+                	RS485_Bridge_DrainToPC(); // ? 스트리밍
+            		}	
+
+            		// 남은 FIFO도 끝까지 한번 더 드레인
+            		RS485_Bridge_DrainToPC();
+		
+            		// 브릿지 종료
+            		g_rs485_bridge_active = 0;
+			
+			rs485_rx_done   = 0;
+			rs485_rx_index  = 0;
+			rs485_rx_length = 0;
+			R_UART0_Receive((uint8_t*)&rs485_rx_buffer[rs485_rx_index], 1);
+
+            		if (!g_rs485_bridge_done) {
+                	    PC_PRINT("Err:rs485_timeout\r\n");
+            		}
+        	    }
+    	        }	
+
+    	        // 슬레이브(다른 보드)에서 addr mismatch는 조용히 무시
+    	        return;
+	    }	
+
+            // addr == g_fixed_addr: 로컬 처리(채널 선택)
+            if (mode == 'C') {
+                s_prefix_mode = PREFIX_CAL;
+		Cal_Init();
+		Gate_SetByNum(ch, hash_on, anaout_on, check_on);
+                GateCtrl_SelectChannel(ch);
+                
+            } else {
+                s_prefix_mode = PREFIX_EOL;
+		Eol_Init();
+                Gate_SetByNum(ch, hash_on, anaout_on, check_on);
+                GateCtrl_SelectChannel(ch);
+                
             }
-            byte_len = (unsigned int)(100*(line[pos]-'0') + 10*(line[pos+1]-'0') + (line[pos+2]-'0'));
-            pos += 3;
-            if (byte_len > CMD_MAX) { uart1_send_string("Err:len_range\r\n"); goto clear; }
 
-            if (proto == PROTOCOL_I2CA || proto == PROTOCOL_OWIA) {
+            // prefix만 온 경우 / payload 처리
-                if (byte_len != 0 && byte_len != 3) {
+            {
-                    uart1_send_string("Err:len_a_mode\r\n"); goto clear;
+                int rem = idx - payload_pos;
-                }
+
-                if (byte_len == 0) {
+                if (rem <= 0) {
-                    if (pos != idx) { uart1_send_string("Err:read_no_payload\r\n"); goto clear; }
+                    if (mode == 'E') {
-                } else {
+                        // EOL은 payload 없어도 OK
-                    if ((int)(pos + (int)byte_len*2) > idx) { uart1_send_string("Err:len_mismatch\r\n"); goto clear; }
+                        OUT_PRINT(src, "<ACK>XE\r\n");
-                    for (k = 0; k < byte_len; k++) {
+                        return;
-                        cmd[k] = hex2byte(line[pos + 2*k], line[pos + 2*k + 1]);
+                    } else {
+                        // CAL은 payload 필수
+                        OUT_PRINT(src, "Err:CAL_need_payload\r\n");
+                        return;
                     }
-                    pos += byte_len*2;
-                    if (pos != idx) { uart1_send_string("Err:len_trail\r\n"); goto clear; }
                 }
-            }
+
-            else if (proto == PROTOCOL_OWIT || proto == PROTOCOL_I2CT ||
+                // payload 있는 케이스인데 EOL이면 금지
-                     proto == PROTOCOL_OWIW || proto == PROTOCOL_I2CW)
+                if (mode == 'E') {
-            {
+                    OUT_PRINT(src, "Err:EOL_no_payload\r\n");
-                if (byte_len == 0) { uart1_send_string("Err:payload0\r\n"); goto clear; }
+                    return;
-                if ((int)(pos + (int)byte_len*2) > idx) { uart1_send_string("Err:len_mismatch\r\n"); goto clear; }
-                for (k = 0; k < byte_len; k++) {
-                    cmd[k] = hex2byte(line[pos + 2*k], line[pos + 2*k + 1]);
                 }
-                pos += byte_len*2;
+
-                if (pos != idx) { uart1_send_string("Err:len_trail\r\n"); goto clear; }
+                // CAL + payload만 통과: payload를 line 앞으로 당김
-            }
+                for (i = 0; i < rem; i++) line[i] = line[payload_pos + i];
-            else if (proto == PROTOCOL_OWIR || proto == PROTOCOL_I2CR)
+                line[rem] = '\0';
-            {
+                idx = rem;
-                if (byte_len == 0) { uart1_send_string("Err:read_len_nonzero\r\n"); goto clear; }
+                pos = 2;
-                if (pos != idx) { uart1_send_string("Err:read_no_payload\r\n"); goto clear; }
             }
+        }
+        // r==0 (prefix 없음): 그냥 아래 일반 커맨드 파싱으로 진행
+    }
+
+    // 3) 최소 길이 체크
+    if (idx < 7) {
+        OUT_PRINT(src, "Err:short\r\n");
+        return;
+    }
+
+    // 4) 프로토콜 판별
+    {
+        char h0 = (char)toupper((unsigned char)line[0]);
+        char h1 = (char)toupper((unsigned char)line[1]);
+        proto = detect_protocol(h0, h1);
+    }
+    if (proto == PROTOCOL_UNKNOWN) {
+        OUT_PRINT(src, "Err:ID\r\n");
+        return;
+    }
+
+    // 5) T 모드 처리 (OT/IT 등)
+    if (line[pos] == 't' || line[pos] == 'T') {
+        if (proto == PROTOCOL_OWIW) proto = PROTOCOL_OWIT;
+        else if (proto == PROTOCOL_I2CW) proto = PROTOCOL_I2CT;
+        pos++;
+    }
+
+    // 6) 구분자 처리
+    if (line[pos] == '_' || line[pos] == ':') pos++;
+
+    // 7) ID (hex 2글자)
+    if (pos + 1 >= idx) {
+        OUT_PRINT(src, "Err:id_short\r\n");
+        return;
+    }
+    id = hex2byte(line[pos], line[pos + 1]);
+    pos += 2;
+
+    // 8) 길이(3자리 10진)
+    if (pos + 2 >= idx ||
+        !(line[pos]   >= '0' && line[pos]   <= '9') ||
+        !(line[pos+1] >= '0' && line[pos+1] <= '9') ||
+        !(line[pos+2] >= '0' && line[pos+2] <= '9')) {
+        OUT_PRINT(src, "Err:len_dec\r\n");
+        return;
+    }
 
-            process_cmd(proto, id, cmd, byte_len);
+    byte_len = (unsigned int)(100*(line[pos]-'0') + 10*(line[pos+1]-'0') + (line[pos+2]-'0'));
+    pos += 3;
+
+    if (byte_len > CMD_MAX) {
+        OUT_PRINT(src, "Err:len_range\r\n");
+        return;
+    }
+
+    // 9) Write 계열: payload(hex) 파싱
+    if (proto == PROTOCOL_OWIT || proto == PROTOCOL_I2CT ||
+        proto == PROTOCOL_OWIW || proto == PROTOCOL_I2CW)
+    {
+        if (byte_len == 0) {
+            OUT_PRINT(src, "Err:payload0\r\n");
+            return;
+        }
+
+        if ((int)(pos + (int)byte_len*2) > idx) {
+            OUT_PRINT(src, "Err:len_mismatch\r\n");
+            return;
+        }
+
+        for (k = 0; k < byte_len; k++) {
+            cmd[k] = hex2byte(line[pos + 2*k], line[pos + 2*k + 1]);
+        }
+
+        pos += (int)byte_len * 2;
+
+        if (pos != idx) {
+            OUT_PRINT(src, "Err:len_trail\r\n");
+            return;
+        }
+    }
+    // 10) Read 계열: payload 없어야 함
+    else if (proto == PROTOCOL_OWIR || proto == PROTOCOL_I2CR)
+    {
+        if (byte_len == 0) {
+            OUT_PRINT(src, "Err:read_len_nonzero\r\n");
+            return;
+        }
+        if (pos != idx) {
+            OUT_PRINT(src, "Err:read_no_payload\r\n");
+            return;
+        }
+    }
+
+    // 11) 실제 실행 (prefix 모드 반영)
+    process_cmd_by_prefix(s_prefix_mode, proto, id, cmd, byte_len);
+}
+
+
+void handle_uart_command_line(void)
+{
+    while (1)
+    {
+	// 브릿지 중이면 RS485->PC를 계속 흘려보냄
+        if (g_rs485_bridge_active) {
+            RS485_Bridge_DrainToPC();
+        }    
+	    
+        // PC(UART1)
+        if (uart_rx_done)
+        {
+	    uart_rx_done = 0;
+
+            process_one_line(CMD_SRC_PC, uart_rx_buffer, uart_rx_length);
 
-        clear:
-            idx = 0;
             uart_rx_index = 0;
             uart_rx_length = 0;
             R_UART1_Receive((uint8_t *)&uart_rx_buffer[uart_rx_index], 1);
         }
+
+        // RS485(UART0)
+        if (rs485_rx_done)
+        {
+            rs485_rx_done = 0;
+
+            // 브릿지 중엔 “RS485 라인 커맨드 처리”는 하지 않음(응답 스트리밍 중이니까)
+            if (!g_rs485_bridge_active) {
+                process_one_line(CMD_SRC_RS485, rs485_rx_buffer, rs485_rx_length);
+            }
+
+            rs485_rx_index = 0;
+            rs485_rx_length = 0;
+            R_UART0_Receive((uint8_t *)&rs485_rx_buffer[rs485_rx_index], 1);
+        }
     }
 }
 
@@ -326,7 +689,8 @@ void main(void)
     R_UART1_Start();     // PC
 
     R_UART1_Receive((uint8_t *)&uart_rx_buffer[uart_rx_index], 1);
-
+    R_UART0_Receive((uint8_t *)&rs485_rx_buffer[rs485_rx_index], 1);
+    
     handle_uart_command_line();
 
     delay(100000);
@@ -352,13 +716,10 @@ void R_MAIN_UserInit(void)
 
     rs485_init();
 
-    R_ADC_Create();
-    R_ADC_Set_OperationOn();
-
     DipSwitch_Init();
-    g_fixed_addr = DipSwitch_ReadAddr_1to32();
+    g_fixed_addr = DipSwitch_ReadAddr_0to31();
 
-    GateCtrl_Init();
+    
     /* End user code. Do not edit comment generated here */
 }
 

r_systeminit.c

@@ -23,7 +23,7 @@
 * Device(s)    : R5F10PPJ
 * Tool-Chain   : CCRL
 * Description  : This file implements system initializing function.
-* Creation Date: 2026-01-13
+* Creation Date: 2026-01-21
 ***********************************************************************************************************************/
 
 /***********************************************************************************************************************
@@ -33,7 +33,6 @@ Includes
 #include "r_cg_cgc.h"
 #include "r_cg_port.h"
 #include "r_cg_serial.h"
-#include "r_cg_adc.h"
 #include "r_cg_wdt.h"
 /* Start user code for include. Do not edit comment generated here */
 /* End user code. Do not edit comment generated here */
@@ -75,7 +74,6 @@ void R_Systeminit(void)
     R_SAU0_Create();
     R_SAU1_Create();
     R_IICA0_Create();
-    R_ADC_Create();
     R_WDT_Create();
 
     /* Set invalid memory access detection control */

uart.c

@@ -7,8 +7,7 @@
 #define RS485_EN_PM     PM4
 #define RS485_EN_MASK   (0x20U)   // P4.5
 
-float g_adc_bytes[ADC_NUM_CH] = {0.0f};
+
-uint8_t g_adc_len = 0;
 
 void rs485_set_tx(uint8_t on)
 {
@@ -123,60 +122,3 @@ void uart1_send_hex(uint8_t val)
 
 
 
-/**
- * 함수명: ADC_ReadAndSend_UART
- * 목적: 여러 ADC 채널을 읽고 전압으로 변환하여 전역 배열에 저장
- *
- * 동작 방식:
- *   1) ADC 채널 배열 정의
- *      - ADC_NUM_CH 개수만큼 읽을 채널 지정
- *      - 예: {0x02, 0x03, 0x04, 0x05}
- *
- *   2) 각 채널 순차적으로 읽기
- *      for (i = 0; i < ADC_NUM_CH; i++)
- *        a) ADS 레지스터에 채널 선택
- *        b) R_ADC_Start()로 변환 시작
- *        c) 변환 완료 대기 (ADIF == 1 될 때까지)
- *        d) ADIF 플래그 클리어
- *        e) 변환 값 읽기: R_ADC_Get_Result(&adc_value)
- *        f) ADC 정지: R_ADC_Stop()
- *
- *   3) ADC 값을 전압으로 변환
- *      - voltage = (adc_value / ADC_RESOLUTION) * VREF
- *      - 예: 12bit ADC, VREF = 5V이면 0~4095 → 0~5V 변환
- *
- *   4) 전역 배열에 저장
- *      - g_adc_bytes[i] = voltage
- *      - g_adc_len 증가
- *
- * 참고:
- *   - g_adc_bytes[]: 변환된 전압 저장용 전역 배열
- *   - g_adc_len: 현재 읽은 채널 수
- */
-void ADC_ReadAndSend_UART(void)
-{
-    static const uint8_t ADC_CHANNELS[ADC_NUM_CH] = { 0x02,0x03,0x04,0x05};
-    
-    uint16_t adc_value;
-    float voltage;
-    int i;
-    
-    g_adc_len = 0;
-
-    for (i = 0; i < ADC_NUM_CH; i++) {
-        ADS = ADC_CHANNELS[i];     // 채널 선택
-        R_ADC_Start();               // 변환 시작
-        while (ADIF == 0U);          // 변환 완료 대기
-        ADIF = 0U;
-
-        R_ADC_Get_Result(&adc_value);
-        R_ADC_Stop();
-
-        /* V 계산 */
-        voltage = (adc_value / ADC_RESOLUTION) * VREF;
-
-        g_adc_bytes[i] = voltage;
-        g_adc_len++;
-    }
-
-}

uart.h

@@ -7,18 +7,28 @@
 
 #define ADC_RESOLUTION 1023.0f   // 10-bit ADC
 #define VREF           5.06f     // V
-#define ADC_NUM_CH     4
 #define RAM_BYTES      13             
-#define UART_RX_BUF_SIZE 96
+#define UART_RX_BUF_SIZE 256
 
-extern float g_adc_bytes[ADC_NUM_CH];
+// PC(USB, UART1) 출력 전용
-extern uint8_t g_adc_len;
+#define PC_PRINT(s)      uart1_send_string((s))
+#define PC_PRINT_HEX(v)  uart1_send_hex((v))
+
+// RS485(UART0) 출력/송신 전용
+#define RS485_PRINT(s)      uart_send_string((s))
+#define RS485_PRINT_HEX(v)  uart_send_hex((v))
 
 extern volatile uint8_t  uart_rx_done;
 extern volatile uint8_t  uart_rx_index;
 extern volatile uint8_t  uart_rx_buffer[UART_RX_BUF_SIZE];
 extern volatile uint16_t uart_rx_length;
 
+extern uint8_t g_fixed_addr;
+
+#define HOST_PRINT(s) do {                 \
+    if (g_fixed_addr == 0) PC_PRINT(s);    \
+    else RS485_PRINT(s);                   \
+} while(0)
 
 void uart_send_string(const char *str);	// UART0(RS485)
 void uart_send_hex(uint8_t val);	// UART0(RS485)